Brushed Aluminum Coil Roll Pure Alloy 1060 1100 3003 5052 20mm

Application:Automobile lining board, insulation aluminum coil, road signs, square tile or stamping, etc

Product Description

Aluminum and its alloys are today considered one of the most practical of metals for a variety of reasons. Its low cost,light-weight, and modern appearance are among the primary reasons for its widespread use. It is non-sparking, electrically conductive, thermally conductive, non-magnetic, reflective, and chemically resistant. It is popular in the construction, marine and aircraft industries because of its ease of fabrication, non-toxicity, strength (pound-for pound), and resistance to the corrosive atmospheres of industry and marine environments. Anodizing increases this corrosion resistance and also permits iridescent finishes in different colors. Some alloys are slightly corrosive and so are cladded with a thin layer of aluminum for added protection.

Products Name	Aluminium Coil
Alloy/Grade	1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8011, 8079, 8021
Temper	F, O, H	MOQ	5T for customized, 2T for stock
Thickness	0.014mm-20mm	Packaging	Wooden Pallet for Strip & Coil
Width	60mm-2650mm	Delivery	15-25days for production
Material	CC & DC route	ID	76/89/152/300/405/508/790/800mm
Type	Strip, Coil	Origin	China
Standard	GB/T, ASTM, EN	Loading Port	Any port of China, Shanghai & Ningbo & Qingdao
Surface	Mill Finish, Anodized, Color coated PE Film Available	Delivery Methods	By sea: Any port in China
Certificates	ISO, SGS

Alloy Series	Typical Alloy	Introduction
1000 Series	1050 1060 1070 1100	Industrial Pure Aluminium. In all series, 1000 series belongs to the series with the largest aluminium content. The purity can reach over 99.00%.
2000 Series	2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17	Aluminium-copper Alloys. 2000 series is characterized by high hardness, in which the content of copper is the highest, about 3-5%.
3000 Series	3A21, 3003, 3103, 3004, 3005, 3105	Aluminium-manganese Alloys. 3000 series aluminium sheet is mainly composed of manganese. The manganese content ranges from 1.0% to 1.5%. It is a series with better rust-proof function.
4000 Series	4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A	Al-Si Alloys. Usually, the silicon content is between 4.5 and 6.0%. It belongs to building materials, mechanical parts, forging materials, welding materials, low melting point, good corrosion resistance.
5000 Series	5052, 5083, 5754, 5005, 5086,5182	Al-Mg Alloys. 5000 series aluminium alloy belongs to the more commonly used alloy aluminium series, the main element is magnesium, the magnesium content is between 3-5%. The main characteristics are low density, high tensile strength and high elongation.
6000 Series	6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02	Aluminium Magnesium Silicon Alloys. The representative 6061 mainly contains magnesium and silicon, so it concentrates the advantages of 4000 series and 5000 Series. 6061 is a cold-treated aluminium forging product, which is suitable for applications requiring high corrosion resistance and oxidation resistance.
7000 Series	7075, 7A04, 7A09, 7A52, 7A05	Aluminium, Zinc, Magnesium and Copper Alloys. The representative 7075 mainly contains zinc. It is heat-treatable alloy, belongs to super-hard aluminium alloy, and has good wear resistance. 7075 aluminium plate is stress-relieved and will not deform or warp after processing.

 

Chemical Composition(%)

Alloy

Si

Fe

Cu

Mn

Mg

Cr

Ni

Zn

Ti

Zr

Al

1235

≤0.65 (Fe+Si)

≤0.05

≤0.05

≤0.05

-

-

≤0.10

≤0.03

-

≥99.35

1145

≤0.55 (Fe+Si)

≤0.05

≤0.05

≤0.05

-

-

≤0.05

≤0.03

-

≥99.45

8011

0.50-0.9

0.6-1.0

≤0.10

≤0.20

≤0.05

≤0.05

-

≤0.10

≤0.08

-

Remainder

8079

0.50-0.3

0.7-1.3

≤0.05

-

-

-

-

≤0.10

-

-

Remainder

 



 

 
 

Package

 
 

Application

 

Company Introduction

 

 
FAQ:
Q1: What's your terms of payment?
A: 30%T/T as the upfront deposit, 70% before delivery, We will show you the photos and package before you pay the balance.
Q2: What's the terms of delivery?
A: EXW, FOB, CFR, CIF
Q3: What's your delivery time?
A: For stocks, we could transport the goods to loading port within 15 work days after we received the deposit.For productionperiod, it usually takes about 15 days to 30 days after we received the deposit.
Q4: Could you produce according to the samples?
A: Yes, we can customer-made by your samples or technique drawings.
Q5: Could youprovide the compliment samples?
A: Yes, we could provide the free samples on condition that it is available in stocks, however,the transportation fee is borne by buyer.