Isolation transmitter|isolation amplifier|analog isolation amplifier |
|
1-input- 2-output active high accuracy isolation transmitter
Features:
● Small size, low cost, international standards DIN35mm rail mounting
● three-port isolation (input, output and power supply )
● 1-input- 2-output ,isolated between channels
● High accuracy (0.1% F.S, 0.2% F.S)
● High linearity (0.1% F.S)
● High isolation voltage (2500VDC/60S)
● Low temperature drift (35PPM/℃)
● Wide Industrial class operation temperature (-45~+85 ℃)
● High reliability (MTBF> 50 Wan hour)
● Power supply (5VDC/12VDC/15VDC/24VDC single power supply options)
● International standard signal input and output
(0~5V/1-5V/0~10V/0~±10V/4~20mA/0~±20mA/0-100mV etc. optional)
GENERAL DESCRIPTION:
JIE Sheng Technology DIN35 1x2 MI-V(I)x-Px-V(I)Ox active precision
isolation transmitter is a Signal Conditioner with electrical
insulation between input and output,It can receive a variety of
analog signal from the field instrument, and transmit a standard
output signal or user-specified special signal to the control room,
PLC,PC or DCS. The product is isolated between power supply, input
and output, the isolated voltage between them is up to 2500VDC .It
is widely used in the industrial measurement systems, medical
electronic equipment, electrical equipment etc. Adopting high
efficiency electromagnetism isolation technology to achieve signal
isolation, it is available to keep high output accuracy, good
linearity and low temperature drift. Suitable for using in
vibration, damp industrial field, the standard DIN35mm rail
mounting for easy user installation.
Selection Example:
Example 1: Signal input 1:4-20mA; output 1:4-20mA; output 2:4-20mA; power supply:24VDC; Model:DIN35 1x2 MI-I4-P1-IO1
Example 2:Signal input 1:0-10VDC;output 1:0-5VDC;output 2:0-5VDC; power supply:15VDC; Model:DIN35 1x2 MI-V2-P2-VO4
Example 3: Signal input 1:4-20mA; output 1:0-10VDC; output 2:0-10VDC; power supply:24VDC; Model:DIN35 1x2 MI-I4-P1-VO5
Example 4:Signal input 1:0-10VDC;output 1:4-20mA;output 2:4-20mA; power supply:24VDC; Model:DIN35 1x2 MI-V2-P1-IO1
Notes
1."NC" pin must not be connected to any external circuit, or it will damage the product itself;
2. Please read the user manual carefully before using. If any question please contact our technical support department.
3. Please do not use this product in hazardous area. The power supply of this product should be 24VDC power source. It is forbidden to use 220VAC power supply.
4.Calculating from the date of delivery, during normal use of the product, any quality problems are free repair or replacement by Company during 3 years warranty,
5. To avoid invalid, or any failure, users disassemble this product is forbidden