Results for234mm csa wedge probefrom 118 Products.
|
|
Wedge probe IEC62368-1-Figure V.4 Reference Standard: IEC62368-1-Figure V.4 Calibration Certificate:Figure V.4 Wedge probe.pdf Technical Parameters: Test finger length 234mm ...
|
|
|
|
|
IEC60950-1 Test Probe Kits (Wedge Probe, Jointed Test Finger, Rigid Test Finger and Test Pin) 1. Introduction The test probe kits are meet the requirement of IEC60950-1, includes ...
|
|
|
|
|
IEC 62368-1 Figure V4 Test Finger Probe Wedge Probe For Testing Document Shredders Standard description(IEC 62368-1 8.5.4.2.4): The media destruction device is tested with the ...
|
|
|
|
|
Product Details Product details: The wedge probe is a new accessibility probe required by the standard of IEC 60950-1 Fig NAF.2(S5366) and NAF.3(S5370) as well as BS 60950.1108/260...
china
|
|
|
|
|
IEC 60950-1 Figure EE.1 and Figure EE.2 Wedge Probe for Testing Document Shredders Product Overview: This wedge probe meets the requirements of IEC 60950-1 Figure EE.1 and Figure ...
|
|
|
|
|
AWS Probe + wedge 70 60 45 for Ultrasonic Flaw detecor Features: 2.25MHz 5/8 X 3/4 inch AWS angle bean probe Maximum inspection life for change the wedge Good sensitivity Meets all ...
|
|
|
|
|
1. Reference standard: UL60950 Figure NAF2 and NAF3 UL 60950 wedge probe for paper shredders 2. Product Details: This product is used for testing access to document shredders. The ...
|
|
|
|
|
Plain Weave Wire Mesh Making Machine for Wedge Probe Repeatable Pore Size Product Description: Wedge wire screen filter is made up of "V" shape the wedge of stainless steel wire ...
|
|
|
|
|
Angle Beam Transducers Angle Beam Transducers are single or dual element transducers designed for weld inspection or flaw detection where flaws have an angular orientation with ...
|
|
|
|
|
Bently Nevada 330103-00-03-10-02-05 3300 8mmXL Proximitor Probe Part Number: 330103-00-03-10-02-05 Model: Proximity Probes Manufacturer: Bently Nevada Ordering Information Model: ...
china
|
|
|
|
|
330103-00-03-10-02-05 Bently Nevada Proximity Probes Product Highlights ◆ Model: 330103 - Proximity Probes ◆ Unthreaded Length Option: 00 - 0 mm ◆ Overall Case Length Option: 03 - ...
|
|
|
|
|
Short test pin probe,test probe iec 61032 The Test Pin Probe is used to test for accessibility of small objects and meets IEC, CSA and UL requirements. The probe is made of ...
china
|
|
|
|
|
MITECH industrial ultrasonic TOFD wedge used for the detection of welds in boilers Overview MITECH industrial ultrasonic TOFD wedge,used with TOFD probe to effectively reduce TOFD ...
|
|
|
|
|
Hazardous Live Parts Probe HT-I27 Standard:IEC60065 clause 9.1.3,EN61010-1, UL3101-1 and CSA 1010-1. Application:This testing probe is used to verify the protection against access ...
|
|
|
|
|
KLOM Air Pump Wedge Locksmith Tools Lock Pick Set Door Lock Opener This is a new pump model- it has a hard STIFF Plastic insert inside the wedge- it makes the wedge a breeze to ...
|
|
|
|
|
UL474 Figure 5.1 UL Accessibility probe, jointed test finger, UL test probe Parameters Test finger length 234mm Knurled length 30/30/40mm Material stainless steel and nylon ...
china
|
|
|
|
|
APT300 leveling measure sensor 4-20mA submersible liquid level probe high acccuracy underground diesel fuel level indicator sensor Specifications BASIC PARA METERS Range 0~1 M.....
china
|
|
|
|
|
330750-60-05 Bently Nevada High Temperature Velomitor System Manufacturer : Bently Nevada Product No. : 330750-60-05 Product Type : High Temperature Velomitor System Made in U.S.A ...
china
|
|
|
|
|
Wedge probe , IEC 62368-1 Figure V.4 – Wedge probe According to standard: IEC62368-1 Material :heat-treated steel Length :300mm Width :50mm Bendable Section :30/30/40mm Calibration ...
|
|
|
|
|
Wedge Probe For Document Shredder The wedge probe is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could ...
|
|
|
You may also be interested in :
