Active Member
|
[China]
Address: A703-03, Jinquan Dasha, 56 Jiefang DongLu, Lixia district , Jinan City , Shandong province
Contact name:Aana Yue
ShanDong HangKang Medical Equipment Co.,Ltd. |
|
|
Product Description
Specification
* makes operating more convenient.
* infusion monitoring system (Optional),
* the status of each pump is displayed in real time at the central
station through wireless transmission.
* 4.3 inch color LCD display, with backlight, suitable for working
in various ambient light conditions.
* Display time, battery, infusing status, mode, rate, target
volume, accumulated volume, target volume, sound volume, pressure,
department, bed No., I/V set, temperature of medication
* Drip Detector.
* Infusion Stand (Optional)
Features
1. 4.3 inch color LCD with backlight
2. Three working modes: Rate/Volume/Time mode
3. Purge, KVO function
4. Heating function , suitable for infusing in winter or there is
requirement for the fluid medication temperature.
Remote Controller
5. Audible and Visible alarms
6. Alarm: Infusion Complete, Empty, Faulty Signal, Misoperation,
Occlusion, Door Open, Air Bubble, Low Battery,
Setting Error, AC power off, Idle
7. Calibration function, disposable IV set of any brand is suitable
for this pump.
Specification:
| Pump Type | Drip type infusion pump | |
| Pumping Way | Peristalic fingers | |
Adjustable Drop Rate Range | 1~400 drops/min (step: 1 drop/min) | |
| Adjustable Volume Rate Range | 1~1200 ml/h (when 1~99.9 ml/h, step: 0.1 ml/h; greater than 99.9 ml/h, step: 1 ml/h) | |
| Flow Precision | Within±3% (using the IV set appointed by the manufacturer or calibrated high quality IV set) Mechanical precision: within±2%. | |
| Purge Rate | 800 ml/h | |
| KVO Rate | 1 ml/h (1~300 ml/h) 3 ml/h (greater than 300 ml/h) | |
| Infusion Volume Range | 1 ml~9999.9 ml (step: 0.1 ml) | |
| Maximum Accumulated Volume | 9999.9 ml (step: 0.1 ml) | |
| Time Range | 1 min~9999 min (step: 1 min) | |
| Occlusion Alarm Threshold | High:800mmHg±200mmHg(106.7kPa±26.7kPa) Medium:500mmHg±100mmHg(66.7kPa±13.3kPa) Low: 300 mmHg±100 mmHg (40.7kPa±13.3kPa) | |
| Alarm | Infusion Complete, Empty, Faulty Signal, Misoperation, Occlusion, Door Open, Air Bubble, Low Battery, Setting Error, AC power off, Idle. | |
| Air Bubble Detector | Method: ultrasonic wave, sensitivity: ≥25 μL | |
| Fuse | F1AL/250V ("F" indicate fast,"L" indicate low breaking capacity), 2 pcs (installed inside pump) | |
| Power Supply | AC 85~265V, 50/60Hz | |
| Internal Battery | 11.1V rechargeable li-ion battery. Capacity: ≥2000mAh the pump can work more than 4 hours at the flow rate of 25 ml/h after charging for 8 hours (Medium rate specified by GB 9706.27-2005) | |
| Power | ≤40VA | |
| Size | 188 mm(L)*198 mm(W)*228 mm(H) | |
| Weight | 2.2KG | |
| Environment Requirements | Transport | |
| Ambient Temperature | -30℃~+55℃ | |
| Relative Humidity | 20%~95% (non-condensing) | |
| Atmosphere Pressure | 70kPa~106kPa | |
| Storage | ||
| Ambient Temperature | -30℃~+55℃ | |
| Relative Humidity | 20%~95% | |
| Atmosphere Pressure | 70kPa~106kPa | |
| Operation | ||
| Ambient Temperature | +5~+40℃ | |
| Relative Humidity | 20%~90% | |
| Atmosphere Pressure | 86kPa~106kPas | |
Sample Show for Infusion Pump
