Working Principle of Handheld Rod Splitter
Hydraulic Plunger Rock Splitter is mainly composed of a high
hydraulic pump station and split rod. The force output by the
140-180MP ultra-high pressure oil pump station acts on the hole,
and the rock hydraulic splitter blasting equipment would split the
rock in a predetermined direction under the (3000t) powerful force.
Technical Parameter of Handheld Rod Splitter
Model | Length(mm) | Piston | Plunger | Hole | Extension | Weight(kg) |
Quantity | Diameter(mm) | Diameter(mm) | Length(mm) |
ZT90 | 650 | 9 | 35 | 87 | 15 | 27 |
ZT100 | 710 | 8 | 45 | 112 | 25 | 47 |
ZT110 | 820 | 11 | 40 | 100 | 22 | 44 |
ZT120 | 770 | 8 | 45 | 122 | 15 | 60 |
ZT130 | 1006 | 10 | 45 | 130 | 23 | 97 |
ZT150 | 960 | 8 | 50 | 153 | 33 | 118 |
ZT170 | 1004 | 8 | 60 | 174 | 34 | 166 |
ZT200 | 1285 | 8 | 70 | 200 | 32 | 291 |
Working Features of Handheld Rod Splitter
The working time is short, that is, the time when the piston is
extended from the cylinder. The obvious effect of splitting the
rock can be achieved within 1 minute. First, put the hydraulic
splitting rod into the hole, and make sure that all the pistons are
put in. Turn on the power supply, change the manual reversing valve
to the blue oil pipe, and start the oil intake, the piston begins
to extend, and the thrust in the direction of the air surface is
generated in the hole, and the crack path will appear on the rock
surface.
When the hydraulic oil gauge shows that the hydraulic pressure
reaches 120MP, the hydraulic station stops working and is in a
pressure-holding state, which means that the work has been
completed. As long as the black oil pipe of the manual valve is
changed, the piston is retracted and raised manually. Repeated in
turn, easy to operate, easy to learn.
Application of Handheld Rod Splitter
1. Mining of metal mines, non-metal mines, and coal mines.
2. Earthwork excavation works: roads and bridges, houses,
foundations, reinforced concrete demolition, and other works.
3. Tunneling projects: subways, culverts, mines, underground
pipelines, river management, and other projects.
4. Smelting and dismantling work: crushing and dismantling various
smelting furnaces, kilns, refractory bricks, and carbon blocks.
Working Process of Handheld Rod Splitter
The whole working process of the hydraulic splitting rod is powered
by the ultra-high pressure oil station. 120Mpa belongs to the
ultra-high pressure sequence, and the tightness between the various
components must be of a high standard. The core components of the
ultra-high-pressure gas stations we produce are imported devices.
Truly zero failures. During the design of the gas station, we
independently developed an intelligent device. When the pressure
reaches 120Mpa, the motor will stop rotating, the oil pump will
stop working, and the entire gas station will be in a
pressure-maintaining state.
Working Notices of Handheld Rod Splitter
In operation, the hole must be straight when punching, and the rod
must be placed in the hole to ensure that the rod cannot be
exposed. If not, this would result in uneven force and an
unachievable blasting effect. Keep the horizontal plane, be a
straight line, and at the same time face the air side.
Entire Service
We would provide customers with a one-year warranty, during
processing, if customers have any problems with installation and
use, we have professionals to provide online text, voice, or video
communication services for them.