|
[China]
Trade Verify
Address: BLDG 16, #29 Rongyue Dongfang, Guandou Street, Jiujiang District, Wuhu City, Anhui Province
Contact name:Lei
Wuhu ZONCN Automation Equipment Co., LTD. |
|
Verified Suppliers
|
|
|
ZONCN SP600 Series variable frequency drive
Air compressor integrator
SP600 series air compressor integrator using plastic and sheet metal structure, support for floor and wall mounted, ease to install; Easy to operate wiring for test ,use the plug-in connector and proof malfunction plug design for the control circuit terminal; It is highly integration: built-in DC reactors to reduce the external interference, improve the power factor; built-in 220V AC power supply, AC drive anti-over current fuses; Provide 24V DC external output; And built-in detection and protection circuit of integrated PT100 and PTC. It uses special software, connect with HMI, internet without testing, support for one-key start.
| Item | Specification | ||
| Basic control functions | Control mode | Open loop vector control, V / F control | |
| Maximum frequency | Open loop vector control:0～600Hz, V / F control: 0～3200Hz | ||
| Carrier frequency | 0.5kHz～15kHz , The carrier frequency is automatically adjusted based on the load features. | ||
| Input frequency resolution | Digital setting:0.01Hz Analog setting: maximum frequency x 0.025% | ||
| Startup torque | 0.5 Hz/150% | ||
| Speed range | 1:100 | ||
| Speed stability accuracy | ± 0.2%
| ||
| Torque control accuracy | ±10% | ||
| Overload capacity | 60s for 150% of the rated current, 3s for 180% of the rated current. | ||
| Torque boost | Fixed boost Customized boost 0.1%–30.0% | ||
V/F curve
| Straight-line V/F curve Multi-point V/F curve N-power V/F curve (1.2-power, 1.4-power, 1.6-power, 1.8-power, square) | ||
| V/F separation | Two types: complete separation; half separation | ||
Ramp mode
| Straight-line ramp S-curve ramp Four groups of acceleration/deceleration time with the range of 0.0–6500.0s | ||
| Communication methods | RS485 | ||
JOG control
| JOG frequency range: 0.00Hz–50.00 Hz JOG acceleration/deceleration time: 0.0–6500.0s | ||
| Built-in PID | It realizes process-controlled closed loop control system easily. | ||
| Auto voltage regulation (AVR) | It can keep constant output voltage automatically when the mains voltage changes. | ||
| Frequency source | Digital setting | ||
| Input and output interfaces | Analog Input | 1 pressure sensor: 4 ~ 20mA input 2 temperature sensor: PT100 | |
| Digital input | 2 normal digital input 1 PTC protection circuit (compatible with normal digital inputs) | ||
| Digital Output | 2 relays output normally open (built in 220VAC voltage) | ||
| LED diode display | Standard 3 LED display | ||
| protection | Motor overheat protection (PTC), the power-to-ground short-circuit protection, inverter over-current, overload, over voltage, under voltage, overheat, output phase loss, communication fault, current detection fault, EEPROM read-write fault and so on. | ||
| Fan | DP500: Fan inverter: 380V 15-55kW Master Motor built-in fan inverter 380V 1.5kW; 380V 75-160kW Master motor built-in fan inverter 380V 2.2kW | ||
| Environment | Installation location | Indoor, free from direct sunlight, dust, corrosive gas,combustible gas, oil smoke, vapor, drip or salt. | |
| Altitude | Lower than 1000 m | ||
| Ambient temperature | -10°C ～+40°C (Downshift if the ambient temperature is between 40°C and 50°C) | ||
| Humidity | Less than 95%RH, without condensing | ||
| Vibration | Less than 5.9 m/s2 (0.6 g) | ||
| Storage temperature | -20°C～60°C | ||
Inverter outline dimension and install dimension
| Model | W | H | H1 | D | A | B | Ød |
| SP600T-5R5KY-4 | 118 | 238 | 274 | 154 | 80 | 260 | 5.5 |
| SP600T-7R5KY-4 | |||||||
| SP600T-011KY-4 | 145 | 293 | 335 | 172 | 100 | 320 | 7 |
| SP600T-015KY-4 | |||||||
| SP600T-018KY-4 | 168 | 338 | 380 | 172 | 100 | 365 | 7 |
| SP600T-022KY-4 | |||||||
| SP600T-030KY-4 | 217 | 400 | -- | 216 | 202 | 385 | 7 |
| SP600T-037KY-4 | |||||||
| SP600T-045KY-4 | 300 | 440 | 470 | 275 | 210 | 455 | 9 |
| SP600T-055KY-4 | |||||||
| SP600T-075KY-4 | 338 | 436 | 470 | 240 | 270 | 455 | 9 |
HM outline dimension and install dimension
Wuhu Zoncn Automation Equipment Co., Ltd is one of a leading manufacturer focus on producing inverter and servo products in China with 19 years of experience. We have 4 factories with headquarters in Shanghai, total factory area 100,000 ㎡+, annual production capacity is about 900,000 pcs. ZONCN has 6 mains series of VFDs: NZ100, NZ200, Z2000, Z8000, T9000, H5000 (IP65/54), etc. Our factory has passed ISO9001 quality control system and all the products have CE certification.
The voltage ranges are from 110V to 1140V; power range covers 0.4kW to 1000Kw. Our products are widely used in textile, print, CNC machine, food package, injection machine, fan, pump, air compressor, water treatment, industrial washing machine and many industrial applications.
ZONCN has more than 80 dealers in china and abroad. Now our products are exported to more than 50 countries in Asia, Europe, Africa and America. ZONCN will always dedicate in the field of electrical drive and warmly welcome you to be our partner.
ZONCN Development History
