Henan Zhengzhou Mining Machinery CO.Ltd |
Verified Suppliers
|
|
Rotary Kiln Incinerator Introduction:
Rotary incinerator is a widely used incineration equipment in the
field of international industrial waste treatment, its market share
in the field of industrial waste incineration is really high, As a
specific area for burning hazardous wastes , the rotary incinerator
has wide adaptability to complex industrial waste and medical
waste, and it’s stable and convenient to operate, of course, the
equipment maintenance is simple, and so on. Therefore, it is the
most widely used in the field of international hazardous waste
incineration. It is a reliable and effective means to realize the
harmless, reduction and recycling of wastes.
【Applicable materials】
Industrial comprehensive hazardous waste, medical waste, petroleum, chemical, pesticide and other industries of various solid waste, waste liquid, waste gas. Municipal domestic waste, etc.
Advantage:
Low cost: high temperature material contacts refractory. Easy to
change lining
The drive mechanism is simple: the drive mechanism is inside the
kiln shell. Equipment maintenance is convenient.
To ensure no leakage of harmful gases: good sealing measures and
negative pressure in the furnace.
Convenient operation and maintenance: high equipment operation
rate. The annual operating rate is generally 90%
Incineration adaptability: solid waste, liquid, colloid and gas can
be incinerated at the same time
High heat utilization rate: the material is stirred forward. Three
heat transfer modes coexist in one furnace
Combined with patented technology: the traditional secondary
combustion chamber has evolved into a secondary combustion furnace.
Increases ash burn rate. Improve the combustion efficiency of the
rotary kiln. At the same time, it has the functions of normal
temperature slag discharge, slag breaking, air lock and so on.
Specifications:
Hazardous waste rotary kiln for waste incinerationφ2.6m*13.2 technical parameter. | |
Inner diameter of shell 2600mm | Shell length 13200mm |
Downstream arrangement, that is, the direction of material flow is consistent with the direction of smoke flow, the angle of the kiln body is 1.5 degrees. | |
Variable frequency speed control of rotary kiln | 0.1-2.2r/min |
Drive mode | Single side gear drive |
Main Motor | 30kw |
Kiln temperature:850-1200 degree | Surface temperature of kiln shell: 180 degree |
Expansion mode | Linear free expansion at both ends |
Total equipment weight | approx. 54.5t |
★ Customized waste incineration rotary kiln can be provided according to the customers' different industries |
Rotary Kiln Incinerator Working Principle:
Rotary Kiln Incinerator can deal with solid and liquid waste
simultaneously, solid waste is sent into rotary kiln by special
conveying equipment, liquid waste is sprayed into the feed end of
the Rotary Kiln Incinerator body by means of an efficient atomizing
device, the waste in the rotary kiln should experience the process
of water evaporation, volatilization analysis, ignition and
combustion process, The ash portion is discharged from the bottom
of the second combustion chamber, the generated flue gas enters the
second combustion chamber, blended with two combustion air in the
second compartment, complete combustion of flue gas, achieve
exhaust safety standards discharge.