No. | Item | Unit | Parameter |
---|
1 | Stranding single wire Dia | mm | CuΦ1.5—Φ4.5 |
2 | Stranding single wire Dia | mm | Al AlloyΦ1.5—Φ5.0 |
3 | Stranding single wire Dia | mm | AlΦ1.8—Φ5.0 |
4 | Max section area | mm2 | AlCu 1400Cu 800 |
5 | Cage rotate speed | r/min | 43—176 |
6 | Capstan wheel size | mm | Φ2500×2 |
7 | Strand pitch | mm | 38—1070 |
8 | Haul off speed | m/min | 6—44.6 |
9 | Pre-twist pitch | mm | 550-2600 |
10 | Central pay-off bobbin size | mm | PND630 |
11 | Cage reel size | mm | PND630 |
12 | Take -up reel size | mm | ф1600-3150 |
13 | Machine Center height | mm | 1100 |
14 | Total Length | mm | 64000 |
15 | Machine total weight | kg | 100000 |
16 | Main motor Power | kw | 185 |
17 | Total Power | kw | 220 |
The machine is driven by 36 variable steps drive gear-box, with
dual active, dual hauling capstan, its haul force is so strong that
can reach 15t. Natural wire distribution for preventing abrasion
damage of wire cores when stranding.- Wire pay-off tension is controlled pneumatically to guarantee
constant tension in full loaded bobbin or empty bobbin. With
automatic emergency stop device, in case of wire break the device
can control directly every pay-off bobbin in the cage and the
entire machine will automatically stop at once.
- The machine can stranding the copper wire of 630mm2 above 90%
compressed intensity rate, which can meet the requirement of big
across-area XLPE cable.
- Driven by DC motor, the imported PLC and touch Screen (Siemens or
Preface), which is convenient for the operator to set and display
the parameter on the touch screen.
Rod Breakdown Machine
Intermediate Wire Drawing Machine
Fine Wire Drawing Machine
Double Twist Bunching Machine
Continuous Annealing Tin-Coating Machine
Wire drawing dies