Active Member
|
[China]
Address: Oriental HuaRui A, No. 150 Guanzhuang Road, Chaoyang District, Beijing, 100024, China
Contact name:Andy
Beijing GFUVE Instrument Transformer Manufacturer Co.,Ltd. |
|
|
Transformer Toroidal Inductive Current Clamp for Wireless Electricity Monitor
The model Q150 current probe can be used in large current situation and cooperate to cable fault tester and cable identification device, used for cable test work.
Current probes are key to the successful design of electrical
devices, testing instruments,
and electronic parts.
Probes work with testing devices are ideal for measuring currents
with high accuracy making them indispensable tools for evaluating
current consumption and control current. In recent years,
customers are seeking current probes with high sensitivity to
increase the accuracy of design and
verification.GFUVE offers wide range of current sensors for its
portable power analyzers. The
products included in this range can be used to measure current
levels from a few mA to
up to several thousand amperes.
Features:
1. Holding wire diameter: φ150mm
2. Dimension: 229mm×364mm×44mm
3. Load capacity: ma output ≤4ω,
4. 1a output 0.1ω, 5a output 2.5va
5. Installation: clamp type
6. Output mode: lead output
Parameter
| Electrical parameters | |
| Ratio | 1000: 1 or 5000:1 (customized) |
| Accuracy class | 0.2%, 0.5%, 1% |
| Primary current | 0 - 5000A AC |
| Secondary current | 0 - 5A AC (customized) |
| Max. Cont. Input current | 6000A |
| Over voltage category | CAT III 600 V |
| Output signal (AC current) | 500mA,1A,5A AC at nominal input current |
| Output signal (AC voltage) | 333mV,500mV,1V,5V AC at nominal input current |
| Frequency range | 40Hz-2000Hz |
| Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 600 V |
| Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation | Clamp type |
| Output mode | Lead output (2.5m) |
| Mechanical parameters | |
| Dimensions (L x W x H) (mm) | 229x364x 44 |
| Weight (g) | 1700 |
| Holding wire diameter (mm) | φ150 |
| Max. jaw opening (mm) | 150 |
| Jaw color | White |
| Material | PC+ABS+Polycarbonate, UL94 V0 |
Photo
