Automatic Eye Drop Bottle Ophthalmic Inspection Machine
Technical parameters:
Inspection items | appearance and obvious defects like black points fiber etc. |
Scope of application | 2-15 ml |
Speed | 60-80 pzs/min |
Specifications | 2-15ml plastic eye drop bottles |
Electric capacity | 1.5kW |
Voltage | 220V (single-phase AC) 50Hz; |
Detecting process and principle
The bottles to be inspected are placed manually or connected to the
inspection mesh belt, and the bottles are spaced in an orderly
manner by the bottle separating device, and then pass through the
visual inspection station in turn. There is a certain angle between
the front side inspection station camera and the horizontal
direction to detect whether the liquid level of the medicine is
qualified, and at the same time to detect defects such as burrs and
black spots on the front side of the medicine board (the front side
inspection station is equipped with a vertical inspection camera.
table, used to assist in the detection of burr defects in the
horizontal direction on both sides of the medicine plate). The rear
side inspection station camera detects defects such as burrs and
black spots on the reverse side of the medicine board. Defective
medicine board procedures are rejected to waste bins by inspection
results, and good products flow to the next process.
The main controller of the equipment is PLC. The PLC controls the
operation of the equipment and alarm prompts in this system. The
action part includes the action of the mesh belt, the bottle
separation action, the triggering of the camera to take pictures
and the rejecting action. The above actions have corresponding
drivers, and the PLC controls these drivers through I/O contacts.
The mesh belt is the frequency converter, and the bottle dividing
and rejecting are the servo drives. These actions are triggered by
photoelectric switches on the mesh belt.
The bottle-separating device and the waste-rejecting device are
provided with a mechanical zero point, and the servos of the
bottle-separating device and the waste-rejecting device will
automatically return to the mechanical zero point once every time
the equipment is started, and then operate normally.
Configuration list
No. | Name | Brand | Quantity |
-
| W1064-bit genuine system | Advantech | 1 |
-
| PLC | Mitsubishi | 1 |
-
| Servo Driver | Mitsubishi | 2 |
-
| Servo motor | Mitsubishi | 2 |
-
| Industrial computer | Advantech | 1 |
-
| Touch screen | Qualcomm | 1 |
-
| Cooling, filter fan | HFM | 1 |
-
| Speed motor | JSCC | 1 |
-
| UPS power supply | LADS | 1 |
-
| Tri-color warning light | APT | 1 |
-
| Photoelectric switch | KEYENCE | 4 |
-
| Camera | Basler | 3 |
-
| light source | V-light | 4 |