Damival®15244 Epoxy encapsulation adhesive for transformer sealing

Damival®15244

Damival ® 15182 oa a two-component epoxy pouring sealant

Application performance, low viscosity at room temperature curing, F heat resistance system, used in glass fibre and polyester dipping, has been approved for high voltage generator.

Supporting team B: Damival ® 15174 ob

Heat resistance: F - 155 degrees.

Flash: > 100 degrees

Viscosity: 1500 CPS

Curing process: normal temperature 25 degrees / 24 h

Damival ® 15182 oa / 9030 a two-component epoxy pouring sealant

Application performance, low viscosity at room temperature curing, F heat resistance system, used in glass fibre and polyester dipping, has been approved for high voltage generator.

Supporting team B: Damival ® 9030

Heat resistance: class H - 180 degrees.

Flash: > 100 degrees

Viscosity: 4000 CPS

Curing process: 135 * 4 h

Damival ® 15230 oa a two-component epoxy pouring sealant

Application performance: high viscosity at room temperature curing, F system of heat-resistant, is suitable for the casting, the connection box has been approved for high voltage generator.

Supporting team B: Damival ® 15230 ob

Heat resistance: F - 155 degrees.

Flash: > 100 degrees

Viscosity: 10000 CPS

Curing process: normal temperature 25 degrees / 24 h

Damival ® 15350 na a two-component epoxy pouring sealant

Application performance, low viscosity at room temperature curing, F heat resistance system, through UL94V0 approval, good thermal conductivity. Suitable for low voltage stator assembly.

Supporting team B: Damival ® 15210 ob

Heat resistance: F - 155 degrees.

Flash: > 100 degrees

Viscosity: 2300 CPS

Curing process: normal temperature 25 degrees / 24 h

Damival ® 13553 an a two-component polyurethane (pu) pouring sealant

Application performance, low viscosity at room temperature curing, F heat resistance system, approved by UL94V0, low smoke, good thermal conductivity. Suitable for low voltage stator assembly.

Supporting team B: Damival ® 15174 ob

Heat resistance: F - 155 degrees.

Flash: > 100 degrees

Viscosity: 3000 CPS

Curing process: normal temperature 25 degrees / 24 h