Active Member
|
[China]
Address: NINGBO, YINZHOU
Contact name:Michael Qu
NINGBO YOUTE ELECTRIC CO.LTD |
|
|
.
1. With 7 function buttons(4 double speed and 3 single speed) + E-stop.
2. Control contact is up to 11.
3. With battery voltage warning device, the power supply is cut off during low power.
4. Program the button function by computer software.
5. Up/down, east/west, south/north can be programmed to interlock or non-interlock, toggle or normal etc.
6. Start button can be program to be start, normal, toggle function etc.
Frequency range | VHF: 310~331MHz; UHF: 425~446MHz |
Safety code | 32 bits (4.3 billion) |
Transmitted power | ≤10dBm |
Receiver sensitivity | -110dBm |
Safety code | 32 bits (4.3 billion) |
Transmitter power supply | 2 AA batteries |
Receiver power supply | 18~65VAC/DC,65~440VAC/DC(optional) |
Output contactor capacity | 8A sealed relay output (with AC 250V/10A relays, 10A fuse) |
Cable lengtht | 1.65 meters |
Control distance | Approx100m(200 meters is customized) |
Material | Glass-Fiber PA |
Enclosure protection class | IP65 |
Temperature range | -40℃~+85℃ |
Transmitter Dimension | 156 x 61 x 51mm |
Transmitter Weight | 255g(without batteries) |
Receiver Dimension | 168x166x93mm |
Receiver Weight | 780g |
Wiring
Certification
CE
FCC
Explosion Proof
The frequency range for F26 series remote control system is 315MHz and 433MHz. With narrowband FM method, it has 80 channels. Even in situation where many sets of remote control are used in the same time, working channel can be easily chose without interfering with other signals and hundred percent safe and reliable. It is the choice for vehicle equipments, winches, cranes, and other remote controls. With advanced design and high quality components, the system is durable and easy to operate.
F26 series remote control system can easily adapt to complicated and harsh industrial environments such as extra-high /low temperature, dusty strong vibration,greasy, heavy humidity,etc. An emergency stop button is located in the upper left of transmitter wich meets the safety and principle of human body engineering. When stop button is pressed, the system stop working immediately and unconditionally. Transmitter is accordance with EN954-1,3 safety standard. Transmitter is equipped with a shell of more consistent with human body engineering. The new shell material is more durable, lighter and thinner.
Application
MD double speed electric hoist or double speed,double-hook/single speed craneand industrial remote control swith 18 contacts or less.
Crane Remote Control are used for tower cranes, overhead cranes,
concrete pumps, concrete mixers, shipyard, etc., for industrial,
agricultural, clean, drainage and other industries.
1. Overhead Crane Remote Control
Overhead crane is one of the most widely used areas of industrial
overhead crane radio remote control systems. In particular, in
metallurgy, automobile manufacturing, paper mills and material
warehouses, are all equipped with industrial overhead crane radio
remote control systems.
2. Mobile crane, truck crane wireless radio remote control system
Typically, the large car crane remote control system is also
equipped with a data feedback device, the feedback device can be
displayed on the operating system display system, the operator can
monitor the data according to the display.
3. Concrete pump truck wireless radio remote control system
The traditional mode of concrete pump operation to be completed
with the number of people, low efficiency, limiting the performance
of concrete pump truck to play. The use of industrial remote
control device can maximize the machine's performance. The driver
locates the truck, then carry the remote control system to operate
concrete pump truck.
