|
[China]
Trade Verify
Contact name:Brunhilde Lung
Qingdao Jerryborg Marine Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
Marine Rubber Pneumatic Fender Ship Docking Rubber Fender
Product Description
Floating pneumatic fenders are used worldwide in Ship-to-Ship (STS) transfer operations, docks and various vessels. Used in ship-to-ship and ship-to-dock operations, fenders play a vital role in the safe operation of ship berthing and mooring.
1. ISO 17357-1:2014 certified
2. Guaranteed energy absorption
3. Low hull pressures
4. Chain tyre net and Sling type
5. Thick skin construction
6. Good angular performance
Safety and Reliability
Jerryborg Pneumatic Rubber Fenders are constructed of several layers of strong tire-cord, and are thus resistant to pressure and cutting. The safety factor adopted in the design of this fender is based on accepted theory and has been proven by extensive experimentation. Operational experience over a long period of time attests to its high safety and reliability, and hydraulic pressure tests have proven the strength to be suitable. Furthermore, large-size fenders are equipped with a safety valve to release the inside air in the event of accidental over-pressure. The figure below shows data obtained from many destructive pressure tests at various percentage compressions. Such data are used to establish a basic minimum endurable pressure (MEP) curve for pneumatic rubber fenders.
Installation Dimensions
| Size | A | B | C | D | E | F |
| φ1000x1500L | 975 | 950 | 1350 | 200 | 375 | 2000 |
| φ1200x2000L | 1200 | 1140 | 1620 | 220 | 430 | 2600 |
| φ1500x2500L | 1525 | 1420 | 2050 | 250 | 525 | 3250 |
| φ2000x3500L | 2050 | 1900 | 2700 | 300 | 650 | 4500 |
| φ2500x4000L | 2490 | 2380 | 3380 | 450 | 890 | 5200 |
| φ3300x6500L | 3380 | 3140 | 4460 | 500 | 1080 | 8500 |
| φ4500x9000L | 4710 | 4270 | 6180 | 800 | 1470 | 12000 |
[Units: mm]
Performance Table
| IP50 | Performance | Fender Weight | Pressures | Body
| Mooring Chain Diameter mm | |||||
Dia. x Length (mm) | Energy (GEA) kJ | Reaction (at GEA) kN | Pressure (at GEA) kPa | Body Only kg | Chain Net (excl body) kg | Sling Type | Relief Valve kPa | Proof Test kPa | ||
| φ300 x 600L | 0.5 | 24 | 134 | 15 | - | 20 | - | 200 | 12 | 13 |
| φ500 x 1000L | 6 | 64 | 132 | 24 | 121 | 35 | - | 200 | 12 | 16 |
| φ600 x 1000L | 8 | 74 | 126 | 28 | 132 | 39 | - | 200 | 12 | 16 |
| φ700 x 1500L | 17 | 137 | 135 | 50 | 165 | 60 | - | 200 | 13 | 16 |
| φ800 x 1500L | 24 | 158 | 132 | 64 | 280 | 72 | - | 200 | 14 | 16 |
| φ1000 x 1500L | 33 | 182 | 122 | 80 | 220 | 107 | - | 200 | 14 | 16 |
| φ1000 x 2000L | 46 | 257 | 132 | 97 | 242 | 124 | - | 200 | 14 | 16 |
| φ1200 x 2000L | 64 | 297 | 126 | 144 | 352 | 171 | - | 200 | 14 | 16 |
| φ1200 x 3000L | 109 | 482 | 134 | 250 | 435 | 280 | - | 200 | 14 | 16 |
| φ1350 x 2500L | 104 | 427 | 130 | 220 | 385 | 264 | - | 200 | 15 | 16 |
| φ1500 x 2500L | 125 | 464 | 126 | 243 | 484 | 287 | - | 200 | 16 | 19 |
| φ1500 x 3000L | 156 | 579 | 132 | 275 | 583 | 319 | - | 200 | 16 | 19 |
| φ1500 x 4000L | 230 | 815 | 130 | 330 | 690 | 380 | - | 200 | 16 | 19 |
| φ1700 x 3000L | 195 | 639 | 128 | 319 | 638 | 363 | - | 200 | 16 | 19 |
| φ1700 x 7200L | 516 | 1621 | 133 | 760 | N/A | 810 | - | 200 | 16 | 22 |
| φ2000 x 3000L | 260 | 727 | 122 | 403 | 990 | 469 | - | 200 | 16 | 22 |
| φ2000 x 3500L | 314 | 875 | 128 | 445 | 1056 | 502 | - | 200 | 17 | 22 |
| φ2000 x 4000L | 361 | 1020 | 125 | 490 | 1150 | 540 | - | 200 | 16 | 22 |
| φ2000 x 6000L | 611 | 1631 | 136 | 658 | 1650 | 720 | - | 200 | 16 | 26 |
| φ2500 x 4000L | 676 | 1381 | 137 | 992 | 1364 | 1188 | 175 | 250 | 18 | 26 |
| φ2500 x 5500L | 962 | 2019 | 148 | 1199 | 2035 | 1452 | 175 | 250 | 18 | 32 |
| φ2500 x 9100L | 1631 | 3482 | 140 | 2150 | 3467 | 2230 | 175 | 250 | 18 | 32 |
| φ3000 x 5000L | 1136 | 2021 | 154 | 1520 | 1800 | 1640 | 175 | 250 | 19 | 32 |
| φ3300 x 4500L | 1198 | 1884 | 130 | 1606 | 1881 | 2024 | 175 | 250 | 20 | 36 |
| φ3300 x 6500L | 1850 | 3015 | 146 | 2057 | 2827 | 2475 | 175 | 250 | 20 | 38 |
| φ3300 x 10600L | 3128 | 5257 | 158 | 2816 | 5126 | 3366 | 175 | 250 | 22 | 48 |
| φ4500 x 7000L | 3302 | 3796 | 133 | 3740 | 4290 | 3880 | 175 | 250 | 24 | 48 |
| φ4500 x 9000L | 4847 | 5747 | 146 | 4334 | 5929 | - | 175 | 250 | 24 | 50 |
| φ4500 x 12000L | 6602 | 7984 | 154 | 5269 | 7689 | - | 175 | 205 | 24 | 58 |
| IP80 | Performance | Fender Weight | Pressures | Body Thickness mm | Mooring Chain Diameter mm | |||||
Dia. x Length (mm) | Energy (GEA) kJ | Reaction (at GEA) kN | Pressure (at GEA) kPa | Body Only kg | Chain Net (excl body) kg | Sling Type | Relief Valve kPa | Proof Test kPa | ||
| φ300 x 600L | 0.6 | 17 | - | 20 | - | 250 | 13 | 13 | ||
| φ500 x 1000L | 8 | 85 | 174 | 26 | 121 | 37 | - | 250 | 13 | 16 |
| φ600 x 1000L | 11 | 98 | 166 | 30 | 132 | 42 | - | 250 | 13 | 16 |
| φ700 x 1500L | 24 | 180 | 177 | 52 | 165 | 63 | - | 250 | 14 | 16 |
| φ800 x 1500L | 31 | 204 | 180 | 71 | 280 | 83 | - | 250 | 15 | 16 |
| φ1000 x 1500L | 45 | 239 | 160 | 84 | 220 | 111 | - | 250 | 15 | 16 |
| φ1000 x 2000L | 64 | 338 | 174 | 101 | 242 | 129 | - | 250 | 15 | 16 |
| φ1200 x 2000L | 89 | 390 | 166 | 149 | 352 | 176 | - | 250 | 15 | 16 |
| φ1200 x 3000L | 140 | 623 | 185 | 275 | 435 | 310 | - | 250 | 16 | 16 |
| φ1350 x 2500L | 144 | 561 | 170 | 226 | 385 | 270 | - | 250 | 17 | 16 |
| φ1500 x 2500L | 174 | 610 | 166 | 268 | 484 | 312 | - | 250 | 17 | 19 |
| φ1500 x 3000L | 218 | 761 | 174 | 339 | 583 | 355 | - | 250 | 17 | 20 |
| φ1500 x 4000L | 296 | 1053 | 176 | 363 | 690 | 378 | - | 250 | 17 | 20 |
| φ1700 x 3000L | 272 | 840 | 168 | 348 | 638 | 392 | - | 250 | 17 | 20 |
| φ1700 x 7200L | 668 | 2096 | 170 | 795 | N/A | 845 | - | 250 | 18 | 22 |
| φ2000 x 3000L | 363 | 955 | 160 | 413 | 990 | 479 | - | 250 | 19 | 22 |
| φ2000 x 3500L | 438 | 1150 | 168 | 454 | 1056 | 520 | - | 250 | 19 | 24 |
| φ2000 x 4000L | 520 | 1380 | 173 | 505 | 1150 | 535 | - | 250 | 19 | 24 |
| φ2000 x 6000L | 791 | 2109 | 170 | 724 | 1650 | 810 | 230 | 300 | 18 | 28 |
| φ2500 x 4000L | 944 | 1815 | 180 | 1111 | 1364 | 1309 | 230 | 300 | 20 | 30 |
| φ2500 x 5500L | 1343 | 2653 | 195 | 1353 | 2035 | 1606 | 230 | 300 | 20 | 36 |
| φ2500 x 9100L | 2293 | 4505 | 199 | 2360 | 3467 | 2450 | 230 | 300 | 20 | 38 |
| φ3000 x 5000L | 1593 | 2608 | 185 | 1670 | 1800 | 1850 | 230 | 300 | 21 | 34 |
| φ3300 x 4500L | 1673 | 2476 | 171 | 1892 | 1881 | 2299 | 230 | 300 | 22 | 34 |
| φ3300 x 6500L | 2583 | 3961 | 191 | 2420 | 2827 | 2827 | 230 | 300 | 22 | 42 |
| φ3300 x 10600L | 4366 | 6907 | 208 | 3333 | 5126 | 3872 | 230 | 300 | 23 | 54 |
| φ4500 x 7000L | 4608 | 4988 | 174 | 4136 | 4301 | 4350 | 230 | 300 | 26 | 54 |
| φ4500 x 9000L | 6766 | 7551 | 192 | 4818 | 5929 | - | 230 | 300 | 26 | 58 |
| φ4500 x 12000L | 9218 | 14490 | 202 | 5863 | 7689 | - | 230 | 300 | 26 | 58 |
| Guaranteed Energy Absorption IGEAl is at nominal deflection of 60%. Reaction tolerance is 110%. | ||||||||||
Company Profile
Lies in Qingdao, a beautiful coastal city with red tiling and green trees, blue sea and clear sky, Qingdao Jerryborg Marine Machinery Co., Ltd is a high-tech enterprise integrated with manufacturing, research and innovation, technical services,specialized in manufacturing marine products, such as marine rubber fender, marine airbag, navigation mark and marine buoy. All products get ISO 9001-2008 certificate and IACS quality authentication from CCS, BV, GL, ABS, LG, etc.
With strong technology base, advanced manufacturing technique, complete manufacturing facilities and well-equipped check out equipment, Qingdao Jerryborg Marine Machinery Co., Ltd is devoted to forge itself into a top-ranking international competitive marine products manufacturer providing high quality products and perfect service for all customers, and shoulder the responsibility of ensuring global marine safety via mutually beneficial cooperation with partners from all over the world.
Production Facility
FAQ
Why choose your company?
Jerryborg insists customers requirement first since founded,supply the most professional solution to meet customer's personalized requirements. And we pay great attention to quality control, high reliability is our design principle, quality control starts from beginning, high quality parts, advanced technology and equipment are used, products are designed,manufactured and tested as ISO9001:2015 requirements. All procedures are strictly controlled and completely meet requirements of ship surveyors such as CCS, BV, RS, ABS, LR, etc.
What are Jerryborg's hightlights?
We provide all types of fenders, such as Super Cell Fender, Super Cone Fender, Arch Fender, Cylindrical Fender, D Type Fender, etc. We also offer clients with a design of a complete fender system and installation for port facility.
What are the selling points about your products?
A superior fender product can protect both the vessel and the berthing structure berthed against, preventing any damage and save on repair costs.Our rubber fenders are manufactured in accordance with PIANC guidelines and come in a range of compounds to suit various applications. In addition, Jerryborg can produce according to drawings and provide technical advisory services free of charge.
Is the main material of this product rubber?
Jerryborg produce rubber fenders not only by using natural rubber, polybutadiene, and other general rubber, but also by using chlorosulfonated polyethylene, polyurethane, and other special rubber in order to meet the special requirements of users and requirements of different use environmental.
