Active Member
|
[China]
Address: Room 113, No.159, ShuiNan Road, Fenkou Town,Chun'An County,HZ,CN
Contact name:Darren
Hangzhou Yobang import and Export Co., Ltd. |
|
|
Adult Bike Helmets Adjustable Men Women skateboard scooter Helmet Safety Sports
| Name: | helmet and Protective Gear |
| Size: | S/M/L |
| Material: | ABS+EPS |
DETAILS:
INFORMATION:
Personal protective equipment (PPE) means all equipment which is intended to be worn or held by people at work and which protects them against one or more risks to their health and safety, and any addition or accessory designed to meet that objective. All PPE should be used as a last resort to reduce the risk taking into consideration that the risk will not be eliminated.
Safety helmets are one of the most frequently used forms of PPE. Safety helmets will protect the user’s head against:
impact from objects falling from above, by resisting and deflecting
blows to the head.
hitting fixed dangerous objects at the workplace,
lateral forces - depending on the type of hard hat selected.
Traditional hard hats are not designed to protect users from
impacts to the front, side or back of the head.
open flame, molten metals splash, electric shock, high temperature
– depending on the additional protective properties of the hard hat
selected, e.g. a basic, standard safety helmet does not protect
against an electric shock.
In general, protective helmets, or hard hats, should:
Resist penetration by objects,
Absorb the shock of a blow,
Be water resistant and slow burning, and
Come with instructions explaining proper adjustment and replacement
of the suspension and headband.
All employees working in areas where there is a possible danger of
head injury from impact, or from falling or flying objects, or from
electrical shock and burns, shall be protected by protective
helmets. Safety helmets must be worn when performing most
construction works, works in the vicinity of lifting equipment
(cranes, hoists, etc.) and suspended loads, works in forestry,
works in cisterns, wells, shafts, tunnels, etc. In these situations
the use of a safety helmet will help protect against injuries to
the scalp, skull and cervical vertebrae.
It is the responsibility of the employer to conduct a risk assessment and determine the need for head protection at the workplace.
In some situations the safety helmets serves as a base for other kinds of PPE i.e .will be used together with other PPE, e.g. hearing protection, face visors or respiratory protection equipment. In these situations it is important that the suitability and the compatibility of the different PPE are considered.
Figure 1 shows the construction and the individual components of an industrial safety helmet.
All safety helmets should come with instructions on how to correctly adjust and adapt the helmet for each individual user’s needs. It is therefore important that before using the safety helmet, the user should read and become familiar with these safety instructions.
When adjusting and positioning a safety helmet on the head, the
user must ensure that the:
harness straps crossing the top of the helmet adhere closely to the
head,
headband which runs around the head strictly adhere to the forehead
and nape of the neck,
safety helmet is securely mounted on the head i.e. the helmet must
be positioned on the head and should be limited by the minimum
amount of clearance between the hard shell and the skull. This will
give a low center of gravity and provide exceptional balance.
helmet should be adjusted in a manner that even without the use of
a chin strap it will stay on the head without falling.
Labelling of helmets and safety requirements
EU legislation distinguishes between two areas of regulations
regarding personal protective equipment. The first is discussed in
Directive 89/656/EEC [1], which determines the obligations of the
employer regarding ensuring safe use of personal protective
equipment. The provisions of this Directive also include employers’
obligations connected with the necessity to use personal protective
equipment. Safety helmets should be appropriately selected by the
employer, based on a risk analysis, and delivered to the employees
free of charge. The employer is also responsible for the
maintenance of safety helmets and their replacement, in particular
if the used items have reduced protective properties.
The second area of regulations with regards to personal protective equipment is connected with Regulation 2016/425/EU [2] </ref>. It concerns the rules of placing the products on the common market, i.e. the assessment of conformity with essential health, safety and ergonomics requirements (EHSRs). Therefore, hard hats, should meet the requirements of the Regulation referred to above. It follows from these requirements that the manufacturer of hard hats — or their authorised representative — is responsible for the conformity of the products placed on the EU market with the essential requirements specified in the Regulation, which is confirmed by placing a CE mark on the product.
The minimum information that should be included with the helmets is:
European standard number
name or a logo of the manufacturer
production year and quarter
type of helmet
size.
A helmet which offers additional protective features may also have
a label on the shell with information regarding:
electric insulation properties,
resistance to lateral forces,
resistance to molten metal splashes,
resistance to very high temperatures,
resistance to very low temperatures.
Operating manual / Safety Instructions Under Regulation 2016/425/EU
the manufacturer is required to provide safety information
regarding the hard hat in their technical file. All safety helmets
should come with an operating manual / safety instructions which
should cover all relevant information such as: safety features,
adjustment methods, how to fit it properly onto the user’s head,
maintenance, storage and repairs / replacement. These instructions
should be clear and comprehensible.
FAQ:
Q: How should I submit artwork and what format?
A: You can submit artwork to us by Email or upload your artwork to our FTP.
We accept: COREL DRAW, ILLUSTRATOR, COREL PHOTO PAINT, PHOTOSHOP,
TIFF,. JPEG,. GIF (tiff at 300dpi, jpeg at 300dpi, gif at 600dpi 100%size)
PDF (vectors in PDF, if using raster program make sure you have high res at 100%size.)
Q: What are setup costs?
A: Set up costs most often apply to new graphics. The first time you order and have a two color print to it, we charge a one time
fee for two screen charges. If you are an existing customer and you want to a NEW graphic the same rules apply. Set up fee for
normal deck heat transfer graphic: USD160 unlimited colors. For longboard transferr graphic USD320 unlimited colors.
Q: Can I order samples?
A: Absolutely, we send requested samples at a minimum charge. You will have to pay shipping cost and samples fee,
the samples fee will return back to you after you place your order. New customers must email us the following information.
Company or shop name, Address, telephone No. specific boards.
Q:When is your delivery time?
A:It depends on product and order QTY.
Normally,it takes us 25 days after receiving the deposit,Repeat order only need 15-20 days.
Q: What is the loading port?
A: Regularlly Ningbo or Shanghai
Q: Do you provide OEM developing services?
A: Yes,we have plenty experience in OEM developing, aslo for famous brands,
