|
[China]
Trade Verify
Address: Room 517, 5th Floor, Building 10B, Zone 3, Shenzhen Bay Science and Technology Ecological Park, Gaoxin South Ring Road, Shenzhen High tech Industrial Park (South District), Nanshan District, Shenzhen
Contact name:Yao
Yaoan (Shenzhen) Electronic Technology Development Co., Ltd. |
|
Verified Suppliers
|
|
|
IP67 ATEX Approved PH3 Phosphine Industrial Fixed Single Gas Leak Detector
The YA-D400 series point type gas detectors are an essential tool used in various industries such as chemical, petroleum, metallurgy, liquefied gas stations, painting operations, gas transmission and distribution, and indoor and outdoor dangerous sites that are prone to leaks of toxic and combustible gases.
Our company has developed a practical and user-friendly gas detector in the form of YA-D400 series point type gas detectors. This product is suitable to use with our gas alarm controller YA-K series to create a complete industrial gas alarm system. The detector is designed to be wall-mounted, but it can also hold the tube type, scaffolding type, or even ceiling type installations.
The controller can effectively perform various functions such as uploading the gas detector's data to the controller's single-chip microcomputer for data processing. This results in comprehensive data displays, output controls, and other functions.
The YA-D400 series point type gas detectors are practical and easy to operate, making them an essential tool for various industries. By using our gas alarm controller YA-K series and the gas detectors, you can create a robust industrial gas alarm system that ensures the safety of your workplace.
The Gas concentration detector is designed to detect the concentration of the gas. It displays the concentration of the detected gas accurately.
It features a fault alarm, high and low alarm to ensure that you get notified if something goes wrong with the device.
The device also has a field screen display with backlight, the word is larger and clearer. The backlight turns red when the device alarms, alerting you on the current status of the device.
The infrared remote control input feature ensures you don't have to open the cover to operate the device, making it more convenient to use.
It supports three different sound and light output, corresponding to fault, low report, high report. It also has Zero, calibrate, test function to enable you to fine-tune the device to your preferences.
The device also outputs a DC4-20mA standard signal and supports RS485, two buses, LoRa, flexible communication mode. It utilizes a high-performance ARM microprocessor for easy operation.
The Gas concentration detector also has three relay (250V 5A) output, automatically opening the fan and solenoid valve to manage the gas concentration.
The device can store 40 high and low alarm records, allowing you to refer back to them when needed. Finally, the toxic gas detector can achieve mg/m³ and μmol/mol conversion, making it even more versatile.
| Certifications | CE, FCC, ROHS, SIL, ATEX, ISO9001 |
| Contact Output | Passive Contact, Capacity 5A/220V (3 PCS) |
| Alarm Type | Audible And Visual |
| Sensor Type | Combustible: Catalytic Combustion Type; Toxic: Electrochemical Type (imported Sensor) |
| Accuracy | ±5%FS (sensor Determined) |
| Response Time | Less Than 30 Seconds |
| Warranty | 1 Year |
| Detection mode | Diffused |
| Detection Range | 0-100 Ppm |
| Power Supply | Power Supply 24V; Combustible: ≤4W; Oxygen/Toxic: ≤3W |
Wall mounted gas detector, gas alarm monitor, gas leak detector.
The YA-D400 is ideal for use in a variety of industrial applications, including chemical plants, oil and gas refineries, wastewater treatment facilities, and food processing factories. The diffused detection mode allows for easy installation and monitoring of gas levels in the air. The device can be mounted on walls or ceilings to ensure maximum coverage and protection.
This industrial gas detector is made in Shandong, China and is designed to meet the highest safety standards. It is easy to use and operate with a simple interface and clear display. The device is equipped with an alarm and warning system that alerts workers when gas levels exceed the safe limit. The YA-D400 is also designed to be durable and long-lasting, with a 1-year warranty included.
Overall, the YAOAN YA-D400 Toxic Gas Detector is a reliable and essential tool for anyone working in an environment where hazardous gases are present. Its advanced sensor technology, diffused detection mode, and easy-to-use design make it a top choice for industrial gas detectors and gas meters.
The Toxic Gas Detectors product technical support and services include:
- Assistance with product installation, operation, and maintenance
- Troubleshooting and diagnosis of product issues
- Repair and replacement of defective parts
- Calibration and testing services
- Technical training and support for users
A: The brand name of this toxic gas detector is YAOAN.
Q: What is the model number of this toxic gas detector?
A: The model number of this toxic gas detector is YA-D400.
Q: Where is this toxic gas detector manufactured?
A: This toxic gas detector is manufactured in Shandong, China.
Q: What type of toxic gases can this detector detect?
A: This detector can detect a wide range of toxic gases including carbon monoxide, hydrogen sulfide, and oxygen deficiency.
Q: How often should this toxic gas detector be calibrated?
A: It is recommended to calibrate this toxic gas detector at least once every six months or as required by local regulations and guidelines.
