Shandong Xiangtong Rubber Science Co.,Ltd |
Verified Suppliers
|
|
Steel cord conveyor belts are exceptionally suitable for the
transportation of materials with high strength, over extended
distances, and under substantial loads. Not only are they highly
durable and resistant to wear and tear, but also capable of
withstanding harsh environmental conditions. These remarkable belts
find wide and extensive application in numerous fields, including
but not limited to coal mines, where they efficiently convey large
quantities of coal; mines, where they handle various types of ores;
ports, for the smooth transportation of bulk goods; metallurgy, to
transport hot and heavy metals; electricity, in power plants for
moving coal or other materials; and chemical industries, for the
transfer of diverse chemical substances.
Characteristics
1. High tensile strength: The belts are suitable for large span,
long distance transportation of materials.
2. Small elongation in use: The belts need only a very short
take-up stroke distance.
3. Small diameter of drive pulley: The carcass has a layer of
longitudinally arranged steel cords as its skeleton,and thus is
resistant to flex fatigue. Therefore, drive pulley of smaller
diameter can be used to make the equipment smaller.
4. High adhesion between rubber and steel cord: The steel cords are
coated with zinc on their surface, and also the rubber used has the
property of good adhesion with steel cords. Therefore, the rubber
is tightly adhered to the steel cords and is resistant to shock and
difficult to drop, so the rubber belts are long in service life.
5. Even tension of steel cords: Out of our advanced techniques in
manufacturing, the steel cords are very evenly arranged and have
the same tension, so the belts are well balanced in running and
difficult to run deviation.
6. Good troughability: As the carcass has no transverse skeleton,
it is easy to form a deep trough, so the belts can load more
materials and prevent the materials from escaping.
7. Inspection of the belt with X-rays: Users can take X-rays to
inspect damages of the skeleton steel cords on the conveyor
machines to prevent accidents from happening.
Standard Specifications
Model | Tensile Strength(N/mm) | Cord Pitch (mm) | Cord Diameter (mm) | Min Cover thickness (mm) | Width (mm) |
ST630 | 630 | 10 | 3 | 4 | 800-2400 |
ST800 | 800 | 10 | 3.5 | 4 | |
ST1000 | 1000 | 12 | 4 | 4 | |
ST1250 | 1250 | 12 | 4.5 | 4 | |
ST1600 | 1600 | 12 | 5 | 4 | |
ST2000 | 2000 | 12 | 6 | 4 | |
ST2500 | 2500 | 15 | 7.2 | 5 | |
ST3150 | 3150 | 15 | 8.1 | 5.5 | |
ST3500 | 3500 | 15 | 8.6 | 6 | |
ST4000 | 4000 | 15 | 8.9 | 6.5 | |
ST4500 | 4500 | 16 | 9.7 | 7 | |
ST5000 | 5000 | 17 | 10.9 | 7.5 | |
ST5400 | 5400 | 17 | 11.3 | 8 | |
ST6300 | 6300 | 19.5 | 12.8 | 10 | |
ST7000 | 7000 | 19.5 | 13.5 | 10 | |
ST7500 | 7500 | 21 | 15 | 10 |
Note: Cover thickness, cord diameter, and cord pitch can be
manufactured according to customer’s requirements.
Cover Grades
Grade | Tensile Strength(ISO37) Mpa
| Elongation at break min. (ISO37) % | Abrasion max. (ISO4649) mm³ |
H | 24 | 450 | 120 |
D | 18 | 400 | 100 |
XTO D | 18 | 400 | 50 |
The values will help to determine the appropriate cover compound
for the application or for the materials carries. Reliable
assessment of the behavior of the covers in service for wear and
cut resistance cannot be determined from tensile strength, and
abrasion values alone.