|
[China]
Trade Verify
Address: No.1 Kaixuan Road,High-tech Industrial Development Zone,Jining city,Shandong Province
Contact name:Li Mingyu
Shandong Xiangtong Rubber Science Co.,Ltd |
|
Verified Suppliers
|
|
|
Usage
The Pipe Steel Cord Conveyor Belt is a highly durable and efficient
conveyor belt designed for heavy-duty industrial use. Made from
high-quality materials and expertly crafted, this conveyor belt is
the perfect solution for transporting materials and products in a
variety of industries.
Characteristics
1.Reduction of maintenance and cleaning costs due to avoiding
spillage and loss of material along the conveyor
2.Protection of the conveyed material from external influences like
dust, rain or wind
3.Protection of the environment from pollution by the conveyed
material
4.Large Angle transmission, transmission Angle is usually up to 30
degrees
Technical Details
1.Pipe belt can be guided through tight horizontal and vertical
curves as it is supported by a set of 6 idlers. This results in the
reduction of transfer points and an improved adaption to the
existing topology of terrain or existing factory buildings
2.Higher inclination angles can be achieved as the inner side of
the Pipe offers more contact surface to the conveyed material
compared to a regular conveyor belt
Standard Specifications
| Model | Tensile Strength(N/mm) | Cord Pitch (mm) | Cord Diameter (mm) | Min Cover thickness (mm) | Width (mm) | Pipe diameters (mm) |
| ST630 | 630 | 10 | 3 | 4 |
800-2400 |
100 150 200 250 300 350 400 450 500 550 600 |
| ST800 | 800 | 10 | 3.5 | 4 | ||
| ST1000 | 1000 | 12 | 4 | 4 | ||
| ST1250 | 1250 | 12 | 4.5 | 4 | ||
| ST1600 | 1600 | 12 | 5 | 4 | ||
| ST2000 | 2000 | 12 | 6 | 4 | ||
| ST2500 | 2500 | 15 | 7.2 | 5 | ||
| ST3150 | 3150 | 15 | 8.1 | 5.5 | ||
| ST3500 | 3500 | 15 | 8.6 | 6 | ||
| ST4000 | 4000 | 15 | 8.9 | 6.5 | ||
| ST4500 | 4500 | 16 | 9.7 | 7 | ||
| ST5000 | 5000 | 17 | 10.9 | 7.5 | ||
| ST5400 | 5400 | 17 | 11.3 | 8 | ||
| ST6300 | 6300 | 19.5 | 12.8 | 10 | ||
| ST7000 | 7000 | 19.5 | 13.5 | 10 | ||
| ST7500 | 7500 | 21 | 15 | 10 |
Note: Cover thickness, cord diameter, and cord pitch can be
manufactured according to customer’s requirements.
Cover Grades
In accordance with HG/T 4224-2011 standard
Grade | Tensile strength min. (ISO37) Mpa | Elongation at break (ISO37) % | Abrasion max. (ISO4649) mm³ | Change of tensile strength and elongation at break after hot air aging % |
| H | 25 | 450 | 120 | -25 ~ +25 |
| D | 18 | 400 | 90 | -25 ~ +25 |
| L | 20 | 400 | 150 | -25 ~ +25 |
1.Ozone resistant test condition: (50±5)pphm, 40±2℃, elongation: (20±2)%, time 96hours. 2.Hot air aging test condition:70℃×168h | ||||
The standard values in the table above help to select the appropriate covering adhesive for practical use. The reliable evaluation of the wear and cutting resistance of the covering adhesive cannot be determined by the tensile strength, elongation and wear alone.
