XIYI Group Co., Ltd Xi'an Instrument Factory |
|
hand pump pressure calibrator
Description of hand pump pressure calibrator
Hand-Held Pressure Calibrator vacuum Pumps is a portable pressure pump.For field installation of instrument calibration in the industrial process and control of indoor use all kinds of pressure gauges.Can also provide pressure source correction table for pressure measuring instrument manufacturer.All kinds of pressure transmitter within every 2 Mpa,Pressure sensor and all kinds of pressure gauges Check all available hand pressure pump.
Features of hand pump pressure calibrator :
1.Portable, light weight,,Suppression of light.
2:Easy to use Structural design pressure fine-tuning hand,Rotate the fine-tuning hand can easily change the output pressure.
3:Also comes with a high-pressure hose connection is timing ,Meter connector connect pressure gauge .
4.Hand pressure pump is the handle, the piston rod. Through gas, pump cover, put the oil hand, fine-tuning hand, form joint, etc .rotation.
hand pump pressure calibrator of Specification:
Output pressure: 0 - 1.6Mpa, 0 - 2Mpa
Work environment Temperature: -20~50°C
Relative humidity≤100%
weight:≤0.8Kg
Table joint thread: M14 x 1.5 internal thread (exports by 1/4 NPT),
High pressure hose joint thread: M20 x 1.5 internal thread (exports by 1/2 NPT)
Accessories :
1: Y039,0000:22 Joint( Style II)
2: Hexagonal screw wrench S=1.5
3: Y004M0000:11 plug
Product categories:
Pressure pump into the desktop and handheld, at present, the
characteristic such as desktop pressure pump because of its
portable products represent the future direction.
Portable pressure pump is a portable hand pressure source.Is used
to check - 95 kpa to 160 kpa within the scope of the pressure
gauge, pressure (differential pressure) transmitters and pressure
sensors provide pressure source.
The pressure medium is air pressure pump, smooth lift pressure, is
made of super fine tuning parts, ensure the regulation of small
enough fineness grade (minimum 0.01 Pa).The outer insulation heat
preservation material, greatly reduces the influence of temperature
on micro pressure equipment calibration.Pressure pump USES a fast
connection and the connection line imported from Germany.Pressure
pump adopts full open architecture design, it has simple structure,
high reliability, convenient operation and maintenance, not easy to
leak.Pressure regulating device adopts precision large vessel
piston, unique structure design, special sealing material, without
lubrication, reduce friction, pressure adjusting range is big,
smooth lift pressure.
Build pressure system as the indispensable auxiliary equipment,
measurement has been legal professional measuring departments and
industrial and mining enterprises and the thermal measurement and
JiKong engineering personnel attention.The company on the basis of
extensive investigation and comparison, the development, the
introduction of 60-95 kpa to mpa pressure within the scope of the
pressure device, the set of device the air tightness, durability,
ease as a key breakthrough, the hope can give you choose to add a
space.Bring convenience for your testing work.Portable pressure
pump
Pressure pump to note:
Pressure pump before use tight gas, filling the appropriate oil
(1/2) transformer oil, and gas in tightening, repeatedly clench,
relax handle, out of the gas can be used within the cylinder.
Calibration process of various types of joint sealing, to maintain
the attention when removing the instrument after rotating oil drain
before you hand the open valve, otherwise easy to damage the
instrument.
Related accessories
Conversion connector, that is, the 38 pieces, we usually say that
is made of high quality stainless steel, based on M20 x 1.5
different specifications swaps, can solve a variety of instrument
testing at home and abroad to use;Distance calibration gas
connecting pipe used for gas pressure gauge, connection validator,
distribution sealers five, pressure range is - 100 kpa ~ 0 ~ 800
kpa.High pressure gas connecting pipe, high pressure gas pressure
checking instrument connected to the validator use over a long
distance.10 distribution the seals.Pressure range is - 100 kpa ~ 0
~ 4 mpa;High-pressure hose, high pressure liquid pressure when long
distance calibration instrument, instrument and check the
connection to use.10 distribution the seals.Pressure range is 0 ~
60 mpa;Gas-liquid separation filter: use air pressure source
checking instrument, filter material exclusion oil use.10
distribution the seals.Pressure range is - 100 kpa ~ 0 ~ 25
mpa;Liquid filter: the main impurities, leaching, pressure gauge
tube cavity pressure source to prevent pollution.Five distribution
the seals.Pressure range is 0 ~ 60 mpa.
Product structure and performance
This product is composed of pressure pump and extension
tube.Pressure pump by syringe barrel, rotating handle, control
piston is the locking lever, pressure gauge.