Thermostat Soldering Iron Station 90w/100w/120w
-digital display
-imported ceramic heating elements
-lead-free and environmental protection
Characteristics
- tip and heating element is one integration, contributes 120w power
consumption, with strong backheating function, is specially applied
into low temperature soldering and lead-free soldering.
- Plug-in card temperature control, can avoid the worker to change
the soldering temperature casually.
- Equipped with faults signal device, when the tip temperature is
lower than the
- lowest alarm range or machine parts go wrong like heating element,
circuit,etc
- the station will ring out faults signal, and suggest the worker to
make a check.
- Digital tip temperature measurement function.
- There is 30mm distance between tip and soldering iron, operation is
flexible
- Tip replacement is quick and convenient, just pull the tip out with
heat-resistant pad then put on new tip.
- Equipped with auto power-off function.
- Eliminate static design, stable grounded tip, heating elements for
24v output, can absolutely protect sensitive elements and the
worker’s safety
Soldering Station
Output | 24V |
Temperature range | 200~450℃ |
Temperature stability | ±5℃ (no load) |
Outside dimension | 100W×106H×188Dmm |
Machine weight | 2.5kg |
Soldering Iron
Heating element | AC 24V·85W·ceramic heating element connect with tip |
Tip and Ground resistance | ≤ 2Ω |
Tip and Ground potential | ≤2m |
Wire length | 1.2m |