High Speed 380V 3HP Automatic Edge Banding Machine Double Repair Premill Edgebander

Features
1. The pre-milling system corrects the plate workpiece before lamination. The pre-milling device uses double milling cutters to re-modify the corrugated traces caused by panel sawing to achieve better edge sealing effect. The milling cutter motor will This is done by means of a pressure cylinder, which lifts the tool before reaching the end of the workpiece, and returns to the working position immediately after passing the end of the workpiece.
2. The gluing system is used to apply the glaze melt glue on the edge of the workpiece. The gluing and edge sealing device makes the edge sealing plate and the edge sealing material evenly glued through a special mechanism, so as to ensure a firmer adhesion, and the melted glue will be filled with air. The glue and melt glue will be melted in the glue melting container, the gluing roller will transfer the hot glaze glue to the workpiece by rotating, and the quantitative device will control the supply amount and adjust the distance between the gluing shaft and the workpiece.
3. The flushing system is used to cut off the cutting components that exceed the front and back end of the lamination film. The flushing device moves through precise linear guide rails, and adopts mechanisms such as automatic mold tracking and high-frequency electrode rapid cutting to ensure that the cut surface is smooth and smooth. The cutting unit is used for sawing of super high sections of lamination. The edges are right-angled or beveled by rotation, both of which are done by scraping the edges. The cutting assembly consists of two unrelated cutting units.
4. The rough and fine trimming device is used to repair the excess edge banding material on the upper and lower parts of the edge banding belt of the processed plate. It adopts the structure of automatic mold tracking and high-frequency high-speed motor to ensure the smoothness of the upper and lower parts of the trimmed plate. This system It consists of two parts: primary trimming and secondary trimming. The primary trimming is a flat blade, and the secondary trimming is an arc blade.
5. The profiling tracking system component is used to match the lamination with sol to the shape of the workpiece during the conveying process, and to cut (outline) the edges and corners. The whole assembly consists of two unrelated equipments, one for the machining of the rear side of the workpiece and the upper end of the front door, and the other for the machining of the lower end.
6. The edge scraping device is used to remove the milling marks on the pre-cut PVC lamination film. The edge scraping device is used to eliminate the ripple marks caused by the cutting process of the non-linear motion of the trimming, so that the upper and lower parts of the sapwood are smoother and neater.
7. The polishing component grinds the plastic lamination film and removes the sol residue on the workpiece. The polishing device uses a cotton polishing wheel to clean the processed plate, and the edge-sealing end surface is smoother through polishing, which is used for the polishing component on the upper surface of the workpiece to be fixed. On the upper side, it is not necessary to set the thickness of the workpiece, the polishing assembly for the lower surface of the workpiece is on the lower side, and the rotation direction of the motor is opposite to the running direction of the workpiece.

PLC intelligent control, independent liquid crystal display can see the running process of the machine more clearly and comprehensively, which is convenient, quick and easy to use, real-time monitoring, real-time adjustment, more accurate, high-efficiency production, and the edge sealing effect is not compromised.

The pre-milling system corrects the plate workpiece before lamination. The pre-milling device uses double milling cutters to re-modify the corrugated traces caused by panel sawing to achieve better edge sealing effect. The milling cutter motor will pass the pressure The cylinder is completed, before reaching the end of the workpiece, the cylinder will lift the tool, after passing the end of the workpiece, the tool will return to the working position immediately.

The gluing system is used to apply the glaze melt glue on the edge of the workpiece. The gluing and edge-sealing device makes the edge-sealing plate and the edge-sealing material evenly gluing through a special mechanism to ensure stronger adhesion. , the glue will be melted in the glue melting container, the glue roller will transfer the hot glaze glue to the workpiece by rotating, and the quantitative device will control the supply amount and adjust the distance between the glue application shaft and the workpiece.

The end trimming system is used to cut off the cutting components that exceed the front and rear end laminations. The flush device moves through precise linear guides, and adopts mechanisms such as automatic mold tracking and high-frequency electrode rapid cutting to ensure that the cut surface is smooth and smooth. The cutting unit is used for sawing of super high sections of lamination. The edges are right-angled or beveled by rotation, both of which are done by scraping the edges. A cutting assembly consists of two unrelated cutting units.

Rough trimming device, the cutter at the rough trimming part is a flat knife, which is used to trim the excess edge sealing material on the upper and lower parts of the edge banding of the processed sheet.

Finishing device, the finishing knife is R2 inclined knife, which can leave 5-6 wire allowance for the next scraping process. The automatic tracking of the mold and the high-frequency motor are used to achieve fast cutting, and the R2 inclined knife is used to repair the radian.

Scraping device, profile scraping, is used to eliminate the secondary wave marks caused by the cutting process of non-linear motion of trimming, so that the upper and lower parts of the plate are more smooth and tidy. better.

The polishing device cleans the processed plate with a cotton polishing wheel, removes excess glue stains, and makes the edge banding section smoother and tidy through polishing.