Active Member
|
[China]
Address: 25th Floor, Huafu Commercial Center, Wenfeng District, Anyang City,Henan Province
Contact name:Fiona
Tianjin Mikim Technique Co., Ltd. |
|
|
charcoal briquette making machine in uganda wood log sawdust briquette machine
♦ 1. This is a sawdust briquette-making machine. The machine adopts good quality carbon steel, the service life over 10 years.
♦ 2. If the material too big, we will recommend you crusher according to your requirement. Besides the material size must less than 5mm, the moisture of the material should be 12%.
♦ 3. Too wet or too dry will cause a bad forming effect.
♦ 4. If your material moisture over 12%, we have a sawdust drying machine. After crushing, the material was delivered to the drying machine, then it was sent to forming machine.
| Diameter of briquette | Motor | Capacity | Inlet diameter | Dimension |
| 50mm | 18kw | 180-200kg/h | ≤5mm | 1.7×0.66×1.5m |
| 50mm | 22kw | 220-300kg/h | ≤5mm | 1.78×0.66×1.53m |
| 80mm | 18.5-22kw | 220-300kg/h | ≤5mm | 1.78×0.66×1.53m |
Raw material:
Peanut shell, Rice husk, Sawdust, Little branch, Corncob, Bagasse, Leaves, Logs, Palm kernel, Nuts shell, Straw, Bamboo, Cotton stalk, etc. If you unsure material is ok, please send it to us, will offer a free test service for you.
The working principle of this machine is sawdust was put into the machine, the screw will push the material into the sleeve. After high temperature and high pressure, the raw materials are extruded into different shapes.
There are three spare parts of sawdust briquette: Heating ring,Screw,Sleeve.All of them adopt good quality material.We advice buy some spare parts when you order.Once there has some wrong,change it.It will save labor and time.
