1. Stepless adjustment
the take-up reel transfers a certain speed to the polished
shaft.Without changing the rotating speed of the shaft , only by
moving the indicator on the scale dial, adjusting the traverse
driver's speed of reciprocating motion on the shaft, rang from 0 to
the Max. pitch.
2. Instantaneous reversal
with no need to change the shaft speed of rotation, when the
reversal trigger roller contacts the end stop, the moval dirction
of the traverse driver will be pivoted to its mirror direction with
revesal time of not more than 1 second.
3. High traverse speed
THE traverse drive speed of liner motion on the shaft can be up to
Max 0.4m/sec. and the applicable speed is usually 0.3m/sec. so it
can meet the requirement fo some situations for high traverse speed
and frequent reversal.
4. Release assembly
The traverse drive features the release system. it allows the
rolling rings to disengage from the shaft wihtout the shutdown and
can be manually moved at any position on the shaft, it can be
traverse from the end part.
Types | d1 | d2 | L1 | L2 | L3 | L4 | L5 | L6 | H1 | H2 | Md | Keyway(width*depth) |
GP3-15 | φ15 | φ15 | 430 | 13 | 72 | | 47 | | 68 | 15 | M8 | 5*2.5 |
GP3-20 | φ20 | φ14 | 450 | 14 | 102 | 40 | 41 | 25 | 90 | 15 | 2-M8 | 5*2.5 |
GP3-22 | φ22 | φ14 | 450 | 14 | 102 | 40 | 41 | 25 | 90 | 15 | 2-M8 | 5*2.5 |
GP3-30 | φ30 | φ18 | 500 | 18 | 136 | 78 | 47 | 25 | 105 | 50 | 2-M10 | 6*3 |
GP3-40 | φ40 | φ30 | 880 | 25 | 172 | 112 | 75 | 50 | 140 | 25 | 2-M14 | 8*4 |
GP3-50 | φ50 | φ35 | 880 | 30 | 304 | 264 | 60 | 50 | 168 | | | 10*5 |
GP3-60 | φ60 | φ45 | 1130 | 30 | 304 | 264 | 60 | 50 | 170 | | | 10*5 |