Automatic Computer Cutting Machine Electronic Wire Sheath Line Cutting And Peeling Machine

Automatic computer cutting machine electronic wire sheath line cutting and peeling machine

Specification parameters

Model 230 full automatic computer wire cutting and peeling machine

Appearance size 450mm x 450mm x 360mm

Weight 36kg (net)

Power supply voltage a110v -- 220V (50 / 60Hz)

Power consumption min.20w -- min.220w

Cutting length 0.1mm -- 60000mm

The peeling length is 0.1mm-99mm (depending on the wire). The three-stage peeling can reach 999mm

Twist length

The cut-off error can be corrected

Applicable wire diameter AWG 16 -- AWG 32 (depending on wire)

Feature description

The most advanced electronic products tend to be light, thin, short and small, so the required wires also tend to be thin. Short wires and high precision can just give full play to the maximum length. In the past, it was considered difficult to process the short wire within 50 mm, but now there is no difficulty. Even when the total length is only 1 mm, the two ends can be peeled 0.3 mm at the same time. At the same time, the wire can be sent, the knife can be fed, the knife can be withdrawn, and the peeling speed can be increased. For the isolation wire, it can be peeled to 99 mm, which eliminates the problem that the isolation wire can not be completely peeled and the centerline can be injured.