|
[China]
Trade Verify
Address: Room 605-606, Xingdao Mansion., No.1 Ninghaili, East Xueqian Rd., Wuxi, China
Contact name:Rodgers Ma
Wuxi Tripod Machinery Imp. & Exp. Co., Ltd. |
|
Verified Suppliers
|
|
|
Steel Floor Deck Roll Forming Machine
Introduction
Steel floor deck sheet is rolled by WFD series steel floor decking roll forming machine, the finished products are of many features, such as simple shape, large wave height, high intensity and good adhesivenes when pouring the concrete together with the welded steel wire net on-site. In the high-storey building, it not only can save steel mould board, but also reduce the bearing of the floor; on basis of equal capacity, it reduces the steel amount of engineering useage, so that it saves cost of investment.
WFD series steel floor deck roll forming machine consists of uncoiler and its base, infeed guides, fixed position driven forming stations, shearing device, hydraulic station, PLC control console and so on. We can design different kinds of profile and fittings for steel deck machine, as per customers' requirements.
| Model | WFD | ||||||||||
| Material | Type | Galvanized Steel | Aluzinc Steel | ||||||||
| Thickness(mm) | 0.8-1.2 | 0.8-1.2 | |||||||||
| Yield Stress(mpa) | 300-350 | 230-300 | |||||||||
| Hydraulic station motor power(kw) | 5.5 | ||||||||||
| Main Motor Power | 22-30 | 18.5 | |||||||||
| Total Power | 27.5-35.5 | 24 | |||||||||
| Total Weight | About 18000 | About 18000 | |||||||||
Working Flow
Uncoiling --- Sheet Guiding --- Roll Forming --- Measuring Length & Shearing --- Sheet to Support Table
