8X10cm Stone Cages For Retaining Walls High Tensile Low Elongation Strong Structure

 Rock fall Steel Wire Netting are factory manufactured rolls made up of mechanically double twisted hexagonal wire mesh using.Heavily Galvanized steel wire. Mechanically woven double twisted meshes are non raveling and the edges of the mesh are reinforced with a thicker wire called the selvedge/edge wire.

These nets are used to prevent small size boulders or rocks from falling in road ways, the mine, the water and electricity project, the tourist site, the river course and in the municipal engineering, thus minimizing loss of property or life. In case of applications in marine or highly corrosive environment, an additional protection is provided by extruding 0.5mm thick PVC coating over the heavily galvanized wire. The main advantages over other types of mesh are the features of flexibility, non-raveling design, superior corrosion resistance and unique mechanical

characters.

Mesh size: The mesh openings shall be hexagonal and of a nominal dimension of 80mm x 100mm.

Mesh wire: The nominal wire mesh diameter for the body of the netting shall be 2.7mm in diameter and of a nominal 3.40mm for the edge selvedge wire. All wire shall be in accordance with BS EN 10218-2:1997. The tensile strength falls within a range of 350 to 575 N/mm2. corrosion Wire shall be zinc coated to BS EN10244-2 2001. An additional extruded u-PVC

Project : coating of nominal 0.5mm radial thickness is applied over the galvanised wire

jointing: Rock netting shall be provided with lacing wire or stainless steel “C” rings for site assembly. The lacing wire shall be of a nominal wire

diameter of 2.2mm (all in accordance with the corrosion protection specified) for final jointing.