Incoloy 800 825 840 Nickel Mesh Screen 0.3mm For Filtering ISO Listed

Incoloy 800 825 840 woven wire mesh 30 wire mesh screen stocked

Production Introduction

Inconel Mesh is made of Inconel alloys for use in the moderate to severely corrosive conditions at high temperatures. We produce Inconel mesh in the following grades:

Inconel Mesh has excellent resistance to carburization, pitting and crevice corrosion, stress corrosion cracking and oxidation. It is resistant to a wide range of corrosive media such as organic, inorganic compounds, acids and alkali. It possesses high temperature mechanical strength, creeping resistance and long service life.

Material details

UNS N08811

Incoloy 800 is a nickel – iron – chromium alloy with good strength and excellent resistance to oxidation and carburization in high temperature atmospheres up to 1100 degrees F. It also resists corrosion in many aqueous environments. The low carbon content helps prevent sensitization and consequent intergranular corrosion of weld heat-affected zones. Used for flue-gas scrubbers and for handling phosphoric and sulfuric acids.

Incoloy 800 Fact Sheet

Composition [Ni 32.5%, Cr 21.0%, C .10 Max, Fe Balance]

Specifications ASTM B408

Density 0.288 lbs/in³

Tensile Strength 110 Kpsi*

Elongation 30%*

Melt 2500° F

Max. Operating Temperature 1900° F

USN N08810 & UNS N08811

The Incoloy 800H and 800HT nickel – iron – chromium alloys are the same basic alloys as Incoloy 800 but with significantly higher creep-rupture strength. This is achieved by close control of carbon, aluminum and titanium contents in conjunction with a high-temperature anneal. These alloys are used in chemical and petrochemical processing, in power plants, industrial furnaces and heat treating equipment.

Incoloy 800H/HT Fact Sheet

Composition [Fe 39.5% approx., Ni 30-35%, Cr 19-23%, C 0.06-0.1%]

Specifications ASTM B408

Density 0.287 lbs/in³

Tensile Strength 110 Kpsi*

Elongation 32%*

Melt 2500° F

Max. Operating Temperature 1900° F

UNS N08825

This is a nickel – iron – chromium alloy with additions of molybdenum and copper. It has excellent resistance to both reducing and oxidizing acids, to stress cracking, and to localized attack such as pitting and crevice corrosion. Incoloy 825 is especially resistant to sulfuric and phosphoric acids. Often used in chemical processing, pollution-control equipment, oil and gas well piping, nuclear processing, acid production and pickling equipment.

Incoloy 825 Fact Sheet

Composition [Ni 38-46%, Cr 19.5-23.5%, Fe 22% min, Mo 2.5-3.5%, Cu 1.5-3%]

Specifications ASTM B425

Density 0.294 lbs/in³

Tensile Strength 115 Kpsi*

Elongation 30%*

Melt 2525° F

Max. Operating Temperature 1900-2000° F

Mesh size of the Inconel Mesh

The service we offer

Goods pics

Thanks for your kind attention, any need, pls feel free to contact with me !