Active Member
|
[China]
Address: ADD: Postcoade 053600 B125-B135 Ziwu Indutries Zone Zi Wen Town Anping County Hengshui Heibei Province China
Contact name:Frank.Zhang
Top Fencing Co.Limited |
|
|
1). High-quality 6063-T6 aluminium made by extrusion tooling of
ourselves. We can make new extrusion tooling according to
customer's requirement. It only needs one week to finish extrusion
toolings and make samples.
Component | Wt. % | Component | Wt. % | Component | Wt. % |
Ai | Max 97.5 | Mg | 0.45 - 0.9 | Si | 0.2 - 0.6 |
Cr | Max 0.1 | Mn | Max 0.1 | Ti | Max 0.1 |
Cu | Max 0.1 | Other, each | Max 0.05 | Zn | Max 0.1 |
Fe | Max 0.35 | Other, each | Max 0.15 |
|
|
2). Advanced spot welding by argon-arc welding. Full welding
available.
3). Specially designed welding jig make all welding no deforming
fence panel.
4). Non-chromate conversion coating after welding, but before we do
powder coating.
5). Akzo Nobel high-quality powder coating makes the fence panel
long life.
Specification
Item No. | Panel Size (mm) | Rails (mm) | Pickets (mm) | Rail No. | |
TF15121 | 2100mm High x 2400mm Wide | 40x40x2.5 | 25x25x1.6 | 3 | 2 |
TF15122 | 2100mm High x 2400mm Wide | 40x40x2.0 | 25x25x1.6 | 3 | 2 |
TF15123 | 2100mm High x 2400mm Wide | 40x40x1.6 | 25x25x1.2 | 3 | 2 |
TF15124 | 1800mm High x 2400mm Wide | 40x40x2.5 | 25x25x2.0 |
| 2 |
TF15125 | 1800mm High x 2400mm Wide | 40x40x2.0 | 25x25x1.6 |
| 2 |
TF15126 | 1800mm High x 2400mm Wide | 40x40x1.6 | 25x25x1.2 |
| 2 |
TF15127 | 1500mm High x 2400mm Wide | 40x40x2.0 | 25x25x1.6 |
| 2 |
TF15128 | 1500mm High x 2400mm Wide | 40x40x1.6 | 25x25x1.2 |
| 2 |
| Cap post 65x65mm (wall thickness 2mm - 5mm) | Cut length | |||
| Die Casting Bracket | Four holes | |||
More Features
1
Our powder coating facility has totally 11 powder spray gun. Six
guns are moving up and down both sides of the fence panel. Two
fixed guns for the bottom rail at both sides and the other two
fixed gun for the top rail at both sides. The last fun is always
fixed at the position of spear top.
2.
Crosscut testing for the powder coating.
3,
Our QC check the powder coating thickness every position of the
fence panel. The average thickness of the coating is more than
100um.
4,
The package is extremely important for the powder coated fencing.
We use heavy-duty steel frame package to well protect the good
products. It will be very easy for our customers unload the pallets
by forklift.
FAQ
1.
Q: Can you design for us?
A: Yes, our professional technology department can design for by
our advanced software. Just send us your requirement in word or
oral, we can do all other works for you.
2.
Q: We have a problem of spear crack from another supplier when
forming the spears, do you have the same problem.
A: No, all spears are press-formed before aging, so no crack at
sides of the spear.
3.
Q: What about the sample time and charge?
A: (1) 7-10 days if you want to customize your products. Free
sample.
(2) 3-7 days if material available.
4.
Q: What about the delivery time of our products?
A: For standard fence panels, it needs 2 days to finish a full
40'HQ container. We have enough welder, so do not worry about a
shortage of welders.
5.
Q: What is your MOQ for a trial order?
A: Normally, it needs a full container shipment for protecting
fence panel during transportation. But we can talk about it.
