|
[China]
Trade Verify
Address: No.48, Baihao Industrial Street, Houjie Town, Dongguan City, Guangdong Province, China
Contact name:Andy
DONGGUAN WIREMAC MACHINERY EQPT. CO., LTD. |
|
Verified Suppliers
|
|
|
21 Blocks Intermediate Wire Drawing Machine 30-65KW Disk Type Air Brake
Introduction
Wire drawing machine is the main equipment for drawing high carbon steel wire rod into metal wire. Ordinary wire drawing machine will produce high temperature under the condition of high-speed drawing, and high temperature will have an adverse impact on the drawn metal wire. No matter whether the die of wire drawing machine is air-cooled or water-cooled, the temperature of die and winch cannot be reduced. Even under the condition of water cooling, the temperature of die will not be lower than 250 °C. Therefore, the ordinary wire drawing machine can only pull down and pull out the qualified metal wire under the condition of low-speed operation.
The new type of straight wire drawing machine developed at present can effectively solve the problem of high temperature caused by high-speed wire drawing machine. The tension of the straight wire drawing machine reduces the pressure of the die, the temperature of the die is greatly reduced, and the drawing speed is greatly improved. The forced air cooling of metal wire rod by straight wire drawing machine reduces the problem of wire rod to a certain extent. If the water-cooled wire drawing machine is adopted, the drawing speed can be greatly improved and good mechanical properties can be maintained.
In recent years, the hydrodynamic lubrication box developed with wire drawing machine equipment effectively reduces the temperature of the die by improving the boundary lubrication conditions. At the same time, reduce the tension and improve the drawing speed. Practice has proved that hydrodynamic lubrication can effectively improve the drawing speed.
Technical Parameters
| Name | Specs | ||||||
| Inlet wire range | 2.6mm to 3.0mm | ||||||
| Outlet wire range | 0.4mm to 1.2mm | ||||||
| Drawing blocks | 21 blocks | ||||||
| Final capstan | Φ 250 mm | ||||||
| Wire drawing lubrication | Lubrication by full immersion | ||||||
| Take up single spooling size | 500mm - 630mm | ||||||
| Mechanical elongation rate | 18.4% for 1st to 20th dies and 15% for 21st die | ||||||
| Brake | Disk type air brake | ||||||
| Machine dimensions | L11000 x W5000 x H4000 (mm) | ||||||
| Machine weight | 5000 (kg) | ||||||
Details Picture
Download Center
Intermediate Wire Drawing Machine with Single Spoo...
Note: Please click above link to download our detailed machine
technical specifications.
Manual of Machine Purchase
Packing, Shipping, Quality & Service, FAQ etc.pdf
Our Company
Dongguan Wiremac Machinery Equipment Co., Ltd. Is located in Houjie Town, a famous historic town in China. Our company is a wire and cable equipment manufacturer integrating R&D, processing, assembly, commissioning and after-sales.
The company is committed to copper wire, copper clad steel, copper clad aluminum and other metal wire deep processing and research, with a variety of high quality machines: micro wire drawing machine, fine wire drawing machine, fine wire drawing machine with continuous annealing, medium fine wire drawing machine, intermediate wire drawing machine, intermediate RBD wire drawing machine and copper rod breakdown machine.
Our company provides a complete set of wire processing solutions for customers, but also customize and design non-standard special equipment according to the requirements of customers.
Our company upholds the spirit of “Honesty-based, Quality-based” enterprise, and continue to research and develop innovation and development, with professional skills and standardized pragmatic management, in line with the “High-quality and High-efficiency” business philosophy, from the overall planning, staff training, installation and commissioning, after-sales service, to provide customers with better and more satisfactory products and service.
Our Workshop
FAQ
1. Q: Are you manufacturer or trading company?
A: We are a manufacturer.
2. Q: What info you need before you make the proposal?
A: The input & output wire diameter, spool size, application, 3
phase voltage & frequency, annealing or not, and your other
requirement.
3. Q: How can I trust you and make a payment to you?
A: (1) We are an audited supplier by international SGS, with its
certificate. They approve that we are an original manufacturer and
meet their standard.
(2) We are a member of Made in China, who is always responsible for all customers.
(3) Please visit us and check our factory by video, and request necessary documents from us.
4. Q: I have no experience buying something abroad. What can I do?
A: We will guide and show you how to do the importation, you can
also seek help from your local agency.
5. Q: Do you provide installing and debugging overseas?
A: Overseas machine installation and worker training services are
available.
6. Q: Can you make the machine according to my design or prototype?
A: Yes, we have an experienced team for working out the most
suitable design and production plan for the machine that you are
going to book with us.
7. Q: How does your factory do regarding quality control?
A: There is zero tolerance to poor quality. Quality control
complies with SGS & ISO 9001. Every machine has to past testing
and trial running before it's packed for shipment.
8. Q: How can I trust you that machines pasted testing and trial
running before shipping?
A: 1) We record the testing videos for you, and every necessary
photos for you.
2) We welcome you to visit us and test machine by yourself in our
factory.
9. Q: What about our after-sale service?
A: We provide technical support on line as well as overseas
services by skillful technicians.
10. Q: What should I do if I just start a new business?
A: Contact us immediately, we provide free consultant pre-sales
service. Also we can help you with material purchase, worker
training, etc.
11. Q: Can I visit you factory to check machines on-site? What
Should I bring when I visit your factory?
A: We are manufacturer, and welcome customers to visit us. For
special product design, you are suggested to bring some samples,
you can test it with our machines on-site.
12. Q: Can I use my own logo?
A: No problem, please inform us.
