Active Member
|
[China]
Address: B209,Huayuan Science and Technology Innovation Park, Bao An District, Shenzhen, China
Contact name:Pan
Shenzhen Bozee Technology Co., Ltd. |
|
|
USB Transmitter Conference Room Wireless Presentation Clickshare Screen Sharing for Laptop PC
Transmitter is a transmitting device which works with the *receiver devices to transmit the video source, such as notebook computer, Laptops, mobile phone and other equipment, to the -receiver for display.
Receiver include -Mirroring software which built-in Meeting Flipper Boards and also series of -receiver boxes. Hereby we mainly introduce the basic use of Transmitters.
QS36-2 Datasheet:
| Installation | No Installation, No Configuration |
| Connector | USB Device |
| System | Support Windows 7/8/10,Apple Mac |
| Resolution | 720P~1080P |
| Frame | Max support 1080P 60frames |
| Delay | 90~180ms |
| Display Mode | Support Extended screen |
| Touch back | Support10point touch-back(Windows 7/8/10) |
| Support mouse mode back(Windows,Mac) | |
| Connections Number | 1~8((If more than 8devices, you should an additional router) |
| Show screens | 1~9 |
| Transmitting frequency | Transmitter 300Mbps |
| Wireless transmission protocol | IEEE 802.11 a/g/n/ac |
| Frequency | 5.8G |
| Encryption | AES |
| Protocol | WPA2-PSK |
Connect the transmitter to the USB port of box to automatically pair.
When the host device is connected to the Internet, the box will automatically updated according to the server update. If USB Transmitter pop up the message to upgrade, Please click to upgrade. And then, you need insert the USB button into the USB port of box for upgrading and pairing to synchronize the version. Please don’t plug the USB Transmitter during upgrading.
After upgrading 100%,the interface will show upgrade success, and then pair with the device. After pairing, you can connect to Laptop for casting.
As shown in below photo, click the setting in the lower left corner of the USB Transmitter ,open” ABOUT” to check the current version.
The transmitter can be also configured with a Windows computer, which is mainly used when it is not convenient to insert the transmitter into the host devices.
As shown in below photo, click the settings in the lower left corner of the transmitter to open the pairing. The pairing information is consistent with the box information. Click pairing to prompt that the pairing is successful after 3seconds
