Active Member
|
[China]
Address: chigang, humen town, dongguan city, china
Contact name:Carson
YUYANG MACHINE Co., Ltd. |
|
|
Main features of machine
With double motor driven, PLC touch Screen control the system.
Inlet copper size 3.5mm--3.0mm,
Outlet copper size from 0.8mm to 2.7mm.
With 630 double heads auto-take up.
Weight of machine: 16 tons
Space for the machine: 22m(length)*4.5m(width)*4.5m(height)
Electricity capacity : 250KVA
Raw material: copper (up 99.5%)
Molds: one set of molds can finish all the size.
Production speed:
| Size | Production speed | Production capacity | Elongation | tolerance | speed for 3.0mm |
| 1.0mm | 1200m/min | 544kg/h | Up 31% | ±5μm | 144m/min |
| 1.3mm | 1100m/min | 816kg/h | Up 31% | ±5μm | 216m/min |
List of machine
| Item | Name | Model | Quantity |
| 1 | Pay-off machine | 1 set | |
| 2 | Drawing machine | 280-13 | 1 set |
| 3 | Annealing machine | 2000A(DC) | 1 set |
| 4 | 250mm tension machine | 4V+3V | 2 set |
| 5 | SX630 single head take up | 2 set | |
| 6 | SX650 double heads take up | 2 set | |
| 7 | Electric control box | 1 set | |
| 8 | Annealing control box | 1 set | |
| 9 | Copper Tie head machine | 1 set | |
Brand of parts
1. Temperature control: RKC (Japan)
2. Bear: NSK (Japan)
3. Motor: Service motor, Siemens
4. PLC: Siemens
5. Reducer:CPG (TaiWan)
6. AC convertor (YASKAWA)
7. Button: Schneider
8. Contactor: YangMing(TaiWan)
9. Intermediate relay: OMRON
Pay off machine
Using the pay-off stand to guide the copper busbar to provide the host for continuous stretching, Height is 3200mm,
Drawing machine
Main parameters
| Inlet wire | Φ3.5mm～Φ2.6mm |
| Output wire | 2.7mm～Φ0.8mm |
| Molds | 13 pcs |
| Size of molds | Φ24.5mm×Φ14.5mm； |
| Mechanical transmission ratio | 1.1842 |
| Fixed speed wheel transmission ratio | 1.1842 |
| Stretching tower wheel | 4 pcs, size is 280mm, 199.7mm,142.4mm, 101.5mm,The working surface is sprayed with tungsten carbide, which can be used for adjustment. |
| Fixed speed wheel | The diameter is 280mm, The working surface is sprayed with tungsten carbide |
| Wire speed | 1300m/min； |
| Main motor | 55kw-4P 1500rpm AC motor; |
| Fixed speed wheel motor | 18.5Kw-4P 1500rpm AC motor |
| Host lubricant oil pump: | 0.75KW with 1.5 square m plate condenser; |
| Maximum flow quantity of tensile lubricant | 150L/min |
Machine introduction:
With two motors driven, PLC control the motor speed and production speed.
Using one set of molds, finish size from 3.0-3.5mm stretching to 0.8-2.7mm,
simple structure; large the stretching range ; simple operation.
Using PLC touch screen run the machine according to the set process parameters,
input edit molds and slip parameters, control the mode of equipment,
display the relevant operation data of the equipment. detect and display of machine faults,
machine operational records is storable and readable. stretching by full immersion lubrication,
double tank prevents spillage of molten lubricant, gear drive, mechanical seal gear oil,
cooling and lubricating the gears & bearings through the oil pump after cooling the gear oil.
