Aluminum Wire Drawing Machine Inlet 1.2 To 2.05mm Outlet 0.4 To 1.2mm CCA Wire Drawing Machine

Aluminum wire drawing machine Inlet 1.2 to 2.05mm Outlet 0.4 to 1.2mm CCA wire drawing machine

Main technique parameter:

1. Usage: fine aluminium wire drawing

2. Inlet diameter: 1.0mm-2.05mm

3. Outlet diameter: 0.4mm-1.2mm

4. Maximum drawing speed: 2000MPM/MAX

5. Dies

Number: 24 dies (Customer self provided) 25mm*8—12mmT

No. 1 is independent; No.2~23 are made of cast iron

Pedestal can be adjusted according to the capstan

6. Mechanism surface reduce rate:

From No.1 to No.23 13%

No.24 8%

7. Drawing method: 4 spools double tiers arrangement; horizontally sliding continuous drawing

8. Motor & inverter: main motor: AC 15KW, Brand: WanNan

Spooling motor: AC 3.7KW, Brand: WanNan

Inverter: AC 15KW for main motor

AC 3.7KW for take-up motor

More options

17IWD Al wire Intermediate drawing machine

1,Main technique parameter:

1. Usage: Aluminum wire

2. Inlet diameter: 3.0-3.5mm

3. Outlet diameter: 2.5mm-0.6mm

4. Maximum drawing speed: 1200m/min

5. Dies number: 17 (Customer self provided) 30mm*8

6. Mechanism surface reduce rate:

From No.1 to No.16 18%

No.17 12.5%

7. Drawing method: 4 shafts horizontal arrangement; sliding continuous drawing

8. Drive motor: 37KW/AC frequency converter control

9. Spooler motor: 11KW/AC frequency converter control

10. Frame: Ironed cast

11. Transmission: All transmission by flat belts; main motor lubricated by petroleum

12. Capstan: four-tier capstan; tungsten carbide (6 months of guarantee)

13. Lubrication system: Spray type; lubrication oil 100 liter/min (without water pump)

14. Spooler: Without shaft;

Automatically pneumatic brake when wire is broken;

Single shaft fixed with screw (manually self-lock)

Manual hydraulic unloading (with loading & unloading cart)

15. Spool dimension: 500/630mm

16. Capacity for wire receiving: 200-500KG

17. Traversing unit:

Traversing system: 90W low speed reversible motor type;

Traversing width: 480mm/Max

18. Spooling tension control: Pneumatic balance automatically controls spooling tension (pneumatic source provided by customer self)

More options

RBD-400/13 Capstan Type Aluminum rod Breakdown Machine

RBD-400/13 Aluminum rod breakdown machine is used to draw Φ9.5mm ordinary aluminum rod into Φ1.7mm-Φ4.5mm wire, Drawing capstans are arranged in a line. Fixed speed capstan and other twelve drawing capstans are controlled by two electric motors respectively. It is with quickly change dies system.

1. Main technical parameters:

1.1 Max inlet diameter: Φ9.5mm

1.2 Outlet diameter: Φ1.7mm-Φ4.5 mm

1.3 Max. drawing speed: 25m/s

1.4 Diameter of drawing capstan: Φ400

1.5 Max. No. of drawing dies: 13 dies

1.6 Size of drawing dies: Φ38×25

1.7 Max storage capacity of wire accumulator: 8m

1.8 Motor power of drawing machine : 200KW AC

1.9 Motor power of fixed speed capstan: 55KW (AC)

1.10 Motor power of dual-spool take-up: 15KW*2 (AC)

2. Components of machine:

2.1 Pay-off stand with a rotating arm: 1 Set

2.2 Host drawing machine: 1 Set

2.3 Dancer: 1 Set

2.4 Double spooler take up 1 set

2.5 wire pointer machine: 1 Set

2.6 Electric control system and console : 1 Set.

More options