Active Member
|
[China]
Address: N2401,Jingchang tech park,Caixiang road,Suzhou City,China 2151005
Contact name:Jerry
NEWLEAD WIRE AND CABLE MAKING EQUIPMENTS GROUP CO.,LTD |
|
|
Snap tester for Vertical enameling machine Executive standard: GB/T4074.3-2008/IEC60851-3
Performance Characteristics of Product
◆Executive standard: GB/T4074.3-2008/IEC60851-3; Inspection
standard: JB/T4279.5-2008
◆Used to measure the film adhesion property of enameled round wires
with nominal conductor diameter of 1.000mm and below;
◆Built-in small ultra-quiet air compressor would provide power
supply and automatic constant pressure;
◆Samples, while being jerked, would not move and slip out;
Major Technical Parameters
| Jerking speed | ≥3m/s |
| Start distance between two clamps | 250±1mm |
| Maximum moving distance of movable clamp | 125mm |
| Working pressure | 0.4~0.8MPa |
| Input power | AC220V±10% 50Hz |
| Consumed power | ＜150W |
| Overall dimensions | L×W×H 650×405×425mm |
| Weight | 55kg |
●Optional Model:
JLS-10 Stretching Tester (Subject to NEMA and GB/T4074)
