Active Member
|
[China]
Contact name:Song
Dingzhou Jinte wire mesh equipment Co., Ltd |
|
|
Small and medium-sized water tank type wire drawing machine
Lt-11/280 water tank wire-drawing machine
| Model | specification of supporting equipment |
| Equipment model | LT-11/280water tank drawing machine |
| Drum diameter (traction diameter) | 280mm |
| Draw number | 11 |
| Into Φ wire diameter | Φ2.5mm--Φ2.0mm |
| Wire diameter | Φ0.9mm--Φ0.7mm |
| Incoming line strength | ≤450mpa |
| Maximum compression rate | 90.5%when the mold is full of 11 channels |
| Maximum linear speed | 12 m/s |
| Motor power | 30KW＋receiving line4 KW＝34KW |
| Motor layout | main motor built - in |
| Mold size | Φ28*17(polycrystalline) |
| Drum (tower wheel) layout | two groups of tower wheel layout before and after |
| The direction of the machine | from left to right, in pairs |
| Discharge mode | vertical discharge |
| Collection line way | pneumatic clamping i-round collection line (400 mm *450 mm) |
| Line arrangement | servo motor line arrangement device |
| Wear-resistan | spindle alloy tower wheel |
| Die box | iron |
| Drum (tower wheel) cooling | tower wheel semi-submerged water cooling |
| Die box cooling form | die frame full immersion water cooling |
| Coolant | mechanical seal, user feed, external circulation |
| Lift frame | swing rod type |
| Frame | steel plate, channel steel welding machine |
| Driving | belt ,synchronous belt |
| Bearing support form | shaft seat closed |
| Grease for bearing | lubrication |
| Parking brake | pneumatic |
| Electrical cabinet | Vito structure, protection level IP54 |
| Electrical system | frequency conversion speed regulation 485 communication given |
| Gas, water, electric | Vito structure, protection level IP54 |
I-wheel motor
| Frequency conversion speed regulation 485 communication give
|
Detail images
Finished products
FAQ
Q: Are you the factory?
A: Yes,We are a professional wire mesh machines manufacturer. We dedicated in this industry for 22 years. We can offer you competitive machines.
Q:Where is your factory located? How can I visit there?
A:Our factory is located in ding zhou county, hebei Province, China, about 3.5 hours by car from Beijing .All our clients, from home or abroad, are warmly welcome to visit our company !
Q: What is the voltage ?
A: To ensure each machine runs well in different country and region, we will choose different voltage like 220V 50HZ; 380V 50HZ; 415V 50HZ;440V 60HZ etc.
Q: How much is your machine ?
A: The price is depended on 3 factors:wire diameter, mesh size,and mesh width.
Q: What is your payment terms?
A:Usually by T/T ( 30% in advance, 70% T/T before shipment) or 100% irrevocable L/C at sight, or cash etc. It is negotiationable.
Q: Do your supply includes installation and debugging ?
A: Yes. We will send our best engineer to your factory for installation and debugging. The cost will be quoted separately if you need such service.
Q: How long is your delivery time?
A: If we have in stock, delivery to Tianjin port about 5 days, No stock, it will be 30 days after received your deposit.
Q: How can you guarantee the quality and the warranty?
A: We have an inspection team to check the products at all stages of the manufacturing process-raw material, welding process and test the finished products, etc. 100% inspection in assembly line to achieve the required quality levels.
