Winstar Co.,Ltd. |
|
Main feature:
1. Good separation effect and high number of plates
2. Spotted spots are small, easy to analyze
3. Short separation time
4. High sensitivity, clear spots, non-diffusion
Preparation Plate | Analysis Plate | ||
Coating thickness,mm | 0.20-0.25 | 0.4-0.5 | 0.9-1.0 |
Activity | Three colors apart | ||
Adhesion | Bubbles≤2 unit | ||
Specifications | 25*75, 25*80,25*100, 30*100, 50*100, 50*150, 50*200, 100*100, 100*150 100*200, 200*200 | ||
Note: 1. The three colors in the activity refer to dimethyl yellow, Sudan red, indigo 2. Adhesion is limited to thin layer chromatography silica gel G, GF254
|
Storage method
Store in a dry and ventilated place. Do not store it together with volatile substances. The uncoated thin layer chromatography silica gel plate should be sealed immediately after unpacking to avoid moisture absorption or adsorption of other chemicals affecting the analytical performance. Long storage time or moisture absorption. The thin layer chromatography silica gel plate can be dried and activated at 60-90 °C for 1-2 hours.
Properties: Thin-layer chromatography silica gel analysis plate is a thin-layer chromatography separating material made by applying silica gel on the glass uniformly with an automatic coating device on the premise of using quality silica gel powder as adsorbent and modulating with a new organic binder. It has the features of a small amount of spotting, fast separation, high sensitivity, etc.
Application:This product is widely used in the scientific research and detection of medicine, chemical industry, biochemistry, environmental protection and other systems. It can achieve a good separation effect for some trace compounds or compounds with complex components. It is very suitable for qualitative and quantitative determination.
Technical Index: Coating Thickness: 0.2-0.25mm
Silica Gel Powder Particle Size:10-40um(TLC) 8±2um≥80%(HPTLC)
PH:6.2-6.8
Scattering Parameter: SX=3
Adhesive Fastness: Can be cut with a glass knife or use an HB pencil to make marks.
Warm Tips:
1. Both the technical index and packaging of the product can be customized.
2. The product has a very strong moisture absorption capacity; therefore, it should be stored in a dry and ventilated place n. The silica gel plate not used up after unpacking should be sealed immediately, so as to keep it from absorbing moisture or other chemical substances, which shall affect its separation performance.
[Specification and Description]
TCL Plate | SG | SGF254 |
HPTLC Plate | HSG | HSGF254 |
H-Efficient S-Adsorbent is silica gel G-Glass F254-Fluorescene indicator and wavelength |
[Package]
Specification (cm) | Piece/carton (white carton) | Piece/carton (corrugated carton) |
2.5*8 | 320 | 1600 |
2.5*10 | 320 | 1600 |
5*10 | 160 | 800 |
10*10 | 80 | 400 |
5*20 | 80 | 400 |
10*20 | 40 | 200 |
20*20 |