Home Companies Beijing JiaAn Electronics Technology Co., Ltd.,

Cansec Ti CC2530 ZigBee Module 150mA IoT RF Remote Module

Contact Us

[China]

Trade Verify

Address: Rm.1002,B China Railway Build. No.28, Pingguoyuan Rd, Shijingshan BeiJing 10041，CHINA

Contact name:Sarolyn Kong

Beijing JiaAn Electronics Technology Co., Ltd.,

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Cansec Ti CC2530 ZigBee Module 150mA IoT RF Remote Module

Country/Region	china
City & Province	beijing beijing

Product Details

FCC Approved Cansec IoT RF Remote Module Zigbee Protocol ZB2530UPA-A 2.4GHz Ti CC2530 Antenna Low Cost Zigbee Module Uart

Parameter	Min	Max	Unit
Operating Voltage	2.0	3.6	V
TX Power	-	20	dBm
RX Sensitivity	-	-97	dBm
Standby Current	-	2.5	uA
Operating Frequency	2405	2483.5	MHz
Operating Temperature	-30	85	°C

FCC Approved Cansec IoT RF Remote Module Zigbee Protocol ZB2530UPA-A 2.4GHz Ti CC2530 Antenna Low Cost Zigbee Module Uart

1. The CC2530 is TI's second-generation ZigBee® / IEEE 802.15.4 RF System-on-Chip (SoC) for the 2.4 GHz unlicensed ISM band. This chip enables industrial-grade applications by offering state-of-theart selectivity/co-existence, excellent link budget, and low voltage operation. The CC2531 is identical to the CC2530 with the addition of a USB interface.

2. CC2591 is a range extender for 2.4-GHz RF transceivers,
transmitters and SoC products from Texas Instruments. CC2591 increases the link budget by providing a Power Amplifier
(PA) for higher output power and a Low Noise Amplifier (LNA) for
improved receiver sensitivity. CC2591 further contains RF switches,
RF matching, and a balun for a seamless interface with the CC2530.
This allows for simple design of high performance wireless
applications.

3. This application note describes how to implement the CC2530 and the
CC2591 in the same design. It further describes the expected performance from this
combination as well as important factors to consider with respect
to the layout and regulatory requirements. The combined CC2530 and
CC2591 solution is suitable for systems targeting compliance with
FCC CFR47 Part 15.

4. The RF front end of CC2530 is the same as the ones being used in
CC2531. The presented results in this application note are therefore also
valid for CC2531.

FAQ
Q1: Are you a factory or trade company?
A1: We are a professional factory with 25 years experience.
Q2: Can you accept OEM/ODM?
A2: Sure, we have rich OEM&ODM experience.
Q3: Do you have quality assurance?
A3; Each of our products has undergone quality testing and has two
years of free after-sales service.