TI CC1312 IoT AES 256 Bits Sub GHz Module 434/470/868/915MHz 13dBm TX Power

The AN1312 module is designed based on CC1312R. The CC1312R device is a Sub-1GHz wireless MCU targeting Wireless M-Bus, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), KNX RF, Wi-SUN®, and proprietary systems, including theTI15.4-Stack.

The CC1312R device is a member of the SimpleLink™ MCU platform of cost-effective, ultra-low power,2.4-GHz and Sub-1 GHz RF devices. Very low active RF and microcontroller (MCU) currents, in addition to sub-μA sleep current with up to 80KB of parity protected RAM retention, provide excellent battery lifetime and allow operation on small coin-cell batteries and in energy-harvesting applications.

The CC1312R device combines a flexible, very low-power RF transceiver with a powerful 48-MHz Arm® Cortex®-M4F CPU in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Arm® Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and great flexibility. The low power consumption of the CC1312R device does not come at the expense of RF performance; the CC1312R device has excellent sensitivity and robustness (selectivity and blocking) performance.

The CC1312R device is a highly integrated, true single-chip solution incorporating a complete RF system and an on-chip DC/DC converter. Sensors can be handled in a very low-power manner by a programmable, autonomous

ultra-low power Sensor Controller CPU with 4KB of SRAM for program and data. The Sensor Controller, with its fast wake-up and ultra-low-power 2 MHz mode is designed for sampling, buffering, and processing both analog and digital.

• Built-in CC1312F Sub-1-GHz RF

System-On-Chip (SOC)

• Size:15mm X 22mm X 3.2mm
• Operating Voltage:1.8V to 3.8V
• Operating Temperature: -20℃~+70℃
• Storage Temperature: -40℃~+150℃
• Microcontroller
• Powerful 48-MHz Arm® Cortex®-M4F
• Processor
• 352KB of in-system Programmable Flash
• 256KB of ROM for protocols and library

Functions

• 8KB of Cache SRAM (Alternatively

available as general-purpose RAM)

• 80KB of Ultralow Leakage SRAM
• 2-Pin cJTAG and JTAG Debugging
• Supports Over-the-Air Upgrade (OTA)
• Ultralow Power Sensor Controller with 4KB of SRAM
• Sample, store, and process sensor data
• Operation independent from system CPU
• Fast wake-up for low-power operation
• TI-RTOS, drivers, Bootloader, and IEEE

802.15.4 MAC in ROM for optimized

application size

• Peripherals
• Digital peripherals can be routed to any

GPIO

• 4× 32-bit or 8× 16-bit general-purpose

Timers

• 12-Bit ADC, 200 ksamples/s, 8-Channel
• 2× comparators with internal reference DAC (1× continuous time, 1× ultra-low power)
• Programmable Current Source
• 2 x UART
• 2 x SSI (SPI, MICROWIRE, TI)
• I2C
• I2S
• Real-Time Clock (RTC)
• AES-128 - and 256-bit Crypto Accelerator
• True Random Number Generator (TRNG)
• Capacitive sensing, up to 8 channels
• Integrated Temperature and battery monitor
• Low Power
• Active-Mode RX: 8mA
• Active-Mode TX: 27mA
• Standby: 1 μA (RTC on, 80KB RAM and

CPU retention)

• Radio Section
• Flexible high-performance sub-1 GHz RF

transceiver

• Excellent receiver sensitivity:

-121 dBm for SimpleLink long-range

mode at 5 kbps;

-110 dBm at 50 kbps

• Output power up to +14 dBm with

temperature compensation