Single Column Hydraulic Press Machine 800t For Leveling of
High-strength Workpieces
Application scope:
This C-type single column hydraulic press machine is mainly used for the correction and leveling processing of high strength and non-pressure resistant metal sheet, as well as the pressing work of shaft parts and the drawing,
bending and folding of plate-shaped parts. This machiine is
applicable for various industrial applications.
Main Technical Parameters:
Specification | Data |
Product structure | C-type hydraulic press |
Norminal pressure | 800t |
Max pressure of the hydraulic system | 25MPa |
Installed pressure of the oil pump | 31.5 MPa |
Maximum opening height | 1700 mm |
Maximum cylinder stroke | 1200 mm |
Throat depth | 1500 mm |
Ram idle speed | Approx.100 mm/s |
Ram working speed | Approx.10~20 mm/s |
Ram return speed | Approx.90 mm/s |
Dimension of the slider ram | 1500x1200 mm (WxD) |
Dimension of the lower working table | 3000x1800 mm (WxD) |
Height of the lower working table to the ground | 200 mm |
Operation mode | Adjustment, manual and semi-automation |
PLC and Display | Siemens |
Power supply | 380V/50Hz, 3 phase AC |
Noise level during working | Not more than 75 dB |
Ambient temperature | 0℃~40℃ |
Relative humidity | Not more than 90% |
Woking medium | No.46 antiwear hydraulic oil |
(Above parameters are indicative and can be modified according to
the customer's actual requirements.)
Machine Features:
- C-type Single column structure.
- The hydraulic press machine is mainly composed of combined main
body, main cylinder and lifting cylinder, slider ram, working
table, hydraulic system, electrical control system and etc.
- The C type frame is of full steel overall welded structrure, and
carried out stress relief annealling treatment. It's firmly fixed
onto the foundation ground by anchor bolts. With sufficient
strength and rigidity.
- The machine dpts finite element analysis method to accurately
calculate the stressed parts, so as to ensure the uniform
distribution of stress, small deformation and strong stiffness of
the equipment, so as to meet the requirements of production and
use.
- It's provided with T-slots on the surface of slider ram and lower
working table for the fixation of the tooling.
- The main cylinder is installed on the top beam.
- The main cylinder and piston rod are good quality 45 forging steel.
- The hydraulic system and pump motor are placed on the top of the
machine body.
- The maintenance platform is also provided on the top of the machine
body.
- Siemens PLC and display to control and monitor the whole operation.
- The machine is a new equipment (including all parts, components and
accessories), and manufactured with new high-quality materials. The
mechanical components used is a series of advanced, high quality,
reliable and practical products, and conforms with relevant
international standards.
- Metal components of equipment and instruments are rustproof and
painted except machining surface and electroplating surface.
- All devices and meters are measured in accordance with the
international system of units (SI) standards. The design,
manufacture and tests of the equipment and meters conform to
international industrial standards (ISO) and International
Electrotechnical standards (IEC). The protection grade of all
electrical components is not less than IP54.