Railway Dummy Bogies , Each With 20 Tons Capacity
Application scope:
The Dummy Bogie is the special tooling equipment, to meets the
needs of various types of railway car, to replace bogies, to
carry the vehicle body to complete body to move between the
repair station after the separation of the body and the bogie.
Technical Parameters:
Max Capacity of each process bogie | 20 tons |
Track gauge | 1435 mm |
Wheelset inner distance | 1353±2 mm |
Wheel diameter | 400~450 mm |
Bogie Height | 1700 mm |
Weight of each process bogie | Not more than 5 tons |
Wheelbase | 1300 mm |
Central distance of side support | 1660~1880 mm (adjustable) |
Control mode | Pushed by external forces |
Designed lifespan | 30 years |
(*The detail parameters can be adjusted as per customer's actual
requirements.)
Main Features:
- The dummy bogies are to replace the bogies to complete the
displacement, support and positioning of the railway car body.
Every two process bogies can complete the positioning support of a
car body, which can be easily pushed by manpower, and can move
along the track at low speed with the car body.
- Each process bogie is equipped with four independent wheels. It can
replace the displacement support and positioning function of the
original bogie on the car body, and the car body can move smoothly
under the action of external forces.
- The process bogie can keep the car body stable when supporting and
positioning, which has the same function as the bogie.
- the central distance of the positioning parts on both sides can be
adjusted to adapt to different metro models (A, B and C), and the
maximum distance is 1880 mm.
- The bearing positioning surface can be adjusted up and down on the
supporting platform through the screw, and the supporting platform
can be adjusted in the width direction on the left and right sides
of the frame. To achieve safe and reliable docking with metro
vehicle body and locomotive. The side support can be adjusted up
and down, left and right, with positioning pin installation holes,
which are consistent with the positioning holes on the metro train
body.
- The upper surface of the support in contact with the car body is
made of nylon plate, which is anti-skid, wear-resistant, and can
protect the car body from damage. Under the action of side support
and center positioning support, the process bogie can keep the car
body stable without tilting and displacement.
- The process bogie frame has enough rigidity and strength to ensure
the relative position of wheelset and supporting parts and the
stability and reliability of car body.
Technical Documents:
The following technical documents will be supplied along with the
equipment when delivery in hard copy and soft copy in English
language (provide E-copy to the buyer before delivery):
- Operating and maintenance instruction manual;
- General arrangement drawing;
- Spare part list, Special tool list;
- Product certificate / Factory Acceptance Certificate, etc