Anping Guoxing WireMesh Products Co. LTD |
|
Hot Dipped Galvanized High Security Metal Fencing( mesh size
12.7mmX76.2mm)
High security metal fencing also name 358 fecing,"358" comes from its measurements 3"*0.5"*8" gauges which equates to approx.76.2mm*12.7mm*4mm(Length*Height*Diameter) in metric.
358 security fences are extremely difficult to penetrate.with the small mesh aperture being effectively finger proof,and extremely difficult to attack using conventional hand tools.
High Security Metal Fencing Details
1. Height | 1000mm to 6000mm, popular: 2500mm, 3000mm |
2. Width | 1000mm to 6000mm, popular: 2200mm, 3000mm |
3. Wire thickness | 3mm to 6mm, the most popular is 4mm (BWG Gauge 8#). |
4. Hole size | 76.2mm x 12.7mm (3 inch x 0.5 inch). |
5. Post | Square post, popular: 60mm x 60mm, 80mm x 60mm |
6. V-top | including angle iron, barbed wire, razor barbed wire. |
7. Fastener | flat bar, screw, clamp |
8. Surface treatment | hot- dipped galvanized electric galvanized with polyester powder coated (all colors in RAL) |
High Security Metal Fencing Packing
Panel packing:
<1>Plastic film at the bottom to avoid the panel be destroyed
<2>4 metal corners to ensure the panel strong and uniform
<3>wood plate at the top of pallet to keep the under panel
<4>pallet tube size:40*80mm tubes at the botom vertical
position
Fence post packing:
<1>plastic cap cover onto the post
<2>plastic film +metal pallet for fence pot
Accessories packing:
<1>stainless steel nuts and screws install with clips
<2>5 sets clips load into one plastic bag
<3>12 bags into one carton box
High Security Metal Fencing Benefits
(1) Secure and discreet
A superior system for providing security where a discreet visual
impact on the immediate environment is essential.
(2) Vandal resistant
The finger proof aperture combined with 4mm wire diameter provides
a barrier that is difficult to climb or penetrate. Almost
impossible to cut wires by use of conventional bolt or wire
cutters.
(3) Efficient deterrence
An effective deterrent to intruders available in various heights up
to 6m. Compatible with electronic detection and alarm systems.
(4) Good viewing visibility
In spite of the small mesh aperture the see-through characteristics
remain unimpaired when viewed head-on and even at an angle to the
fence. This is particularly important for clear camera
surveillance.
(5) Durability
The high quality advanced coating technology guarantees an extended
product life span and low maintenance.
(6) Installation
The panels are produced at 3.050 m, reducing the amount of posts
needed by 20%. Installation time is thus reduced.
(7) Weld Strength
The superior welding technique and process control create a
stronger fusion between the wires.
(8) Sharp Topping
The blade profile razor wire along the top of the fence panels
makes it extremely difficult to climb or penetrate.
Where the application specifically demands a heavy duty security mesh design to meet specifications including the use of CCTV, or where
a visual deterrent is a primary consideration, our 358 Security Mesh system provides an ideal solution for a wide variety of high
security perimeter and access control applications.