Active Member
|
[China]
Address: North of Wenming West Road, Changyuan County, Henan Province, P.R.C
Contact name:David
Henan Weihua Heavy Machinery Co,. Ltd. |
|
Metallurgy electric single girder over-head crane
1.Capacity:2-10t
2. Span:7.5-28.5m
3.Lifting height:3-20m
4. ISO CE
Specifications of Metallurgy electric single girder over-head crane
1. Capacity:2-10t
2. Span: 7.5-28.5m
3. Lift height: 3-20m
Brief introduction of Metallurgy electric single girder over-head
crane
single girder crane for metallurgy is mainly used for lifting
molten metal and foundry location.
Its configured lifting mechanism is model YH2 electric hoist for
metallurgy, hoisting capacity<=10t.
Main girder bottom of crane adopts to special heat insulation
disposal.Working environment temperature is -10C~60, relative
humidity is <=50% in 40C.design and manufacture of crane meet
the requirements of AQSIQ Doc #(2007) 375.the requirements of AQSIQ Doc#(2007)375. Other situations that lift
fusion non-metallic material or hot solid metal can refer.
Lifting capacity (t) | 2-10 | |||
Span (m) | 7.7-28.5 | |||
| Travelling speed | 20 | 30 | |
Speed ratio | 58.95 | 39.42 | ||
motor | Type | Cone squirrel-cage | ||
Power (kw) | 0.8x2 1.5x2 | |||
Rotational speed(r/min) | 1380 | |||
| Model of electric hoist | YH model | ||
Lifting speed | 8 7 | |||
Lifting height | 9 12 15 18 20 | |||
Travelling speed | 20 | |||
motor | Cone squirrel-cage model | |||
Working system | Intermediate Jc=25% | |||
Electric current | 380V 50Hz three-phase | |||
Wheel diameter | 270mm 400mm | |||
Width of trail | 37-70 | |||
