Shijiazhuang Renchun Mesh Equipment Co.,Ltd. |
|
380V 200KVA Stainless Steel Welded Wire Mesh Machine 1.5-5 MM Support Rod
Operating instructions for numerical control panel
A. Rotate “Sp sevro rate” and “Feed sevro rate” and select
appropriate speed [speed rate display on the screen], rotate ““Feed
sevro rate”” to adjust feed speed in manual operation status.
Adjust Sp sevro rate” in “AUTO” status and the feed speed will
change simultaneously;
B. Press “Cool on” and “Cool off” to control the water pump;
C. “spot welding” button is for manual trial welding;
D. the function of “ reset” button is as same as “counting reset”
of the touch screen;
E. Press “auto” “manual” “debugging” “welding”, corresponding
information can be displayed on the screen. Default as “manual
mode” and “debugging mode”.
F. Under “manual mode”, press “forward”, the feed will begin to go
forward, press “forward” again or “stop”, the feed will stop.
“backward” button has the same function; “shaft forward” and “shaft
reverse” is pointing control, press main shaft to rotate and loose
to stop;
G. Under “auto mode”, select “debugging” or “welding” mode, if
select “welding”, “Cool on” is needed, and press “operation” button
at last; under “debugging” mode, directly press “operation” button,
the system is commissioning, the Cool can be off and the welding
system does not work.
Stainless Steel Weld Wire Mesh screens, also known as Wedge wire,
V-wire, and Triwire, are custom made for your application. The
features of this type of screen make it an attractive solution for
separating solids from liquids, retaining media, filtering, sizing,
dewatering, collecting, and distributing. Profile Wire screen
offers continuous slot openings that widen inwardly so that
particles tend to pass through the screen and reduce blinding.
What is the Fundamentals of Weld Wire Mesh screens Machine?
Stainless Steel Weld Wire Mesh screen Welding
Machine adopts Japanese Mitsubishi E60 CNC control system.
Controlled by the Numeral control system, the servo motor drives
the ball screw as well as the drawing disk which is mounted on the
straight rail, so the slot clearance can be adjusted by touching
the control screen without stopping the machine.
How to operate the machine? Is it easy to operate?
It is easy to change the data on the touching screen.
Lock-expanding ring is equipped with the machine. After the
operator feeds the longitudinal wire, expand and lock the wire with
the ring.
It saves time and material during unload the filter tube.It is easy
to learn how to control the machine. It adopts Japanese Mitsubishi
E60 CNC control system.
Weld Wire Mesh screen Machine, also named johnson screen welding
machine, is usually used in producing Oil sand control screen,
water well screen, the water, nozzles and so on. with screen media
higher precision, which is widely used in petroleum, chemical, and
paper industries.
Parameter
NO. | ITEM | Data |
1 | Diameter of screen tube | Max.300mm, Min.50mm. |
2 | Max. Length of filter tube | 6000mm |
3 | Rod and wire diameter | 1.2mm to 3mm(profile wire) |
4 | Material | Carbon steel, stainless steel |
5 | servo motor | Two sets:5.5KW,One set:3.5KW |
6 | Power of welding transformer | 200KVA |
7 | Welding speed is adjustable according to the tube diameter | Max.30rpm,6rpm |
8 | Slot(adjustable) | Min0.2mm,Max.16mm |
9 | precision of slot | ±0.03mm |
Renchun Weld Wire Mesh Machine Features and Advantages
A. low noise
B. less power consumption
C. safety
D. easy to operate
E. high welding precision
Advantages: Domestic famous bearings, Internal famous servo motor,
less power consumption, easily operation
Our customer
Sale market:
Domestic market: Heilongjiang, Liaoning, Tianjin, Hebei, Henan,
Shandong, Shanghai, Guizhou, Hubei, Shanxi, Jiangsu, etc.
Foreign market: the United States, Brazil, Italy, Belgium, South
Korea, Singapore, Tunisia, Turkey, Russia, India, etc.