Dehydration Low Flow Rate Sieve Bend Filter DSM Screen 300um Sieve 100 200

 
 
The Introduction
 

Due to its simple and effective design, the sieve bend allows the dehydration of the product as it flows through the sieve surface.With gravity, or with the help of a spray nozzle, the accumulated garbage moves down the screen and can then be easily collected into the trash bin for processing of the sieve bent primarily for dehydration applications at a relatively low flow rate.

The sieve Screen, also known as the DSM screen, is a curved, concave wedge-shaped screen made of stainless steel wedge lines.
The wedge dsm mesh is made by welding stainless steel v profiles to a wedge wire support bar.The wedge line panel mesh is then cut and bent into a wedge line screen mesh with ordinary 45 and 60 equal degree arc.Finally, the wedge wire sieve is inserted into the stainless steel frame for easy installation to the equipment.

The Structure:

The wedge sieve bend is made of stainless steel wedge wire.They are made of a concave, curved contour network, inserted into a stainless steel frame.The wedge sieve is welded with stainless steel v-type wire and support rod.Then cut the panel screen into a curved screen.Screening groove is continuous with good filtering performance.The force applied when the material flows to the surface, the surface screen structure has better filtering performance and greater capacity than the wedge screen plate.

The Operational:

DSM screens (screens) are ideal for glue and dehydration applications in the case of solid or solid / solid separation from dry feed from liquid.When the filter material flows to the screen, the screen curved screen can be made into various widths, arc length, and aperture to accommodate the flow rate and granularity of the separated material.The feed flows in the vertical and tangential direction along the upper screen full width, and then the feed flows down along the concave surface at a right angle to the opening between the wedge lines.The Wiar screen curved screen screen a continuous groove.It has a large opening area and an efficient filtering performance.Surface structures provide higher flow, greater capacity and better filtering than wedge screen plates.Thus, the thinner material is deflected on the underside and passed between the wires.

The Specification material:

Stainless steel wire 304,316,316L, 321, etc
Screen arc angle: 459,609,120,270,300.
Slot position size: 0.25 mm-1 mm.
Two main typical product specifications:
Type 1
Panel width: 2,000 mm.
Arc length: 1,885 mm.
Angle: 609
Slot position size: 0.5 mm.
Section line: 1.8 mm x 4.5 mm.
Support bar: 2mm x 9.5 mm.
Type 2:
Panel width: 2,000 mm.
Arc length: 1,885 m m.
Angle: 609
Slot position size: 0.25 mm.
Section line: 1.27 mm x 2.4 mm.
Support bar: 2mm x 4.2 mm.

The Features:

1. High filtration, sizing, and dehydration performance.
2. Good mechanical performance.
3. Larger capacity than the traditional vibration screen.
4. Corrosion resistance and rust resistance.
5. thermostability.
6. Low maintenance.Easy to clean and less for maintenance.
7. Don't plug.
8. Long service life and durable.
9. Easy to install and replace.

The Application:

Wedge silk sieve bending tubes are mainly used for dehydration, glue application, and wastewater purification.They can be used in various fields, such as:

• sewage disposal.
• Wash it with water while washing your clothes.
• Treatment of poultry, fish, fruit and vegetables wastewater.
• Mineral processing.
• Paper production.
• spinnery.

Please Meet us on The  http://www.wedgefilter.com