Active Member
|
[China]
Address: 1010, 10th Floor, Taojing Building, Minzhi, Longhua, Shenzhen.China 518000
Contact name:Anny
Shenzhen WAYJUN Industrial Automation |
|
|
Features:
>> Accuracy, linearity error level: 0.1,0.2,0.5 level
>> 4-20mA / 0-5V / 0-10V and other standard signal input
>> Optional RS485 communication input, support MODBUS protocol
>> PWM signal output, PWM frequency optional
>> PWM output drive capacity up to 5A
>> Signal input / signal output: 3000VDC isolation
>> Can choose one in one out, one in two out, two in two out
>> Optional 5V, 12V, 15V or 24V DC single power supply
>> The amplitude of the PWM signal is equal to the power supply voltage
>> The auxiliary power supply/PWM signal: non-isolation
>> Fixed screw mounting, plug-in terminal block
>> Size: 120 x 105 x 29mm
>> Industrial temperature range: - 45 ~ +85 ℃
Application:
>> Machine vision lighting control product appearance
>> LED light brightness adjustment
>> Solenoid valve, proportional valve linear actuator
>> Analog motor controller
>> Electromagnetic drive coil or high power load
>> RS-485 remote device control
Products Listing:
DIN□□ IAP – V(A)□ – P□ – PWM□
 |  |  |
| Channel | Input Signal | Power Supply | Output Signal |
DIN11: one in one out DIN12:one in two out DIN22:two in two out | V1:0-5V V2:0-10V V3:0-75mV V4:0-2.5V Vz:user-defined A1::0-1mA A2:0-10mA A3:0-20mA A4:4-20mA Az:user-defined RS485:RS485 interface | P1:24VDC P2:12VDC P3:5VDC P4:15VDC Pz: user-defined | PWM1:50Hz PWM2:100Hz PWM3:1KHz PWM4:10KHz PWM5:100KHz PWMz: user-defined
|
Samples:
1. One in one out Input signal:0-10V Power Supply:24VDC Output Signal:100Hz PWM
Type No.: DIN11 IAP V2-P1-PWM2
2. One in two out Input signal:0-10V Power Supply:12VDC Output Signal:100KHz PWM
Type No.: DIN12 IAP V2-P2-PWM5
3. One in one out Input signal:RS485 Power Supply:24VDC Output Signal: 100KHz PWM
Type No.:DIN11 IAP RS485-P1-PWM5
4. One in one out Input signal:0-10V Power Supply:12VDC Output Signal:5KHz PWM
Type No.: DIN11 IAP V2-P2-PWMz (PWMz:5KHz)
General Parameters:
| Name | Test Condition | Min. | Type | Max. | Units |
| Isolation Voltage | 50Hz,1min.,leak current 1mA | 3000 | VDC | ||
| Isolation | Input/output: isolation Power supply/output: non-isolation | ||||
| Impact Voltage | 3.5KV, 1.2/50us(peak value) | ||||
| Operation Temperature | -25 | +85 | ℃ | ||
| Operation Humidity | No condensation | 10 | 90 | % | |
| Storage Temperature | -45 | +85 | ℃ | ||
| Storage Humidity | 10 | 95 | ℃ | ||
1: analog signal input, one in one out DIN11 Footprint and wire diagram:
| PIN | Name | Description | PIN | Name | Description |
| 1 | IN+ | Signal output+ | 7 | OUT+ | PWM signal output+ |
| 2 | IN- | Signal output- | 8 | OUT- | PWM signal output- |
| 3 | NC | No connecting | 9 | NC | No connecting |
| 4 | NC | No connecting | 10 | NC | No connecting |
| 5 | PW+ | Power supply+ | |||
| 6 | GND | Power supply- |
more details,please check: http://www.wayjun.net/index.php?main_page=product_info&cPath=2&products_id=96
