|
[China]
Trade Verify
Address: SOUTH OF XING’AN ROAD(NORTH OF XUTUAN VILLAGE), ANPING COUNTY, HEBEI PROVINCE, CHINA
Contact name:Orange Song
Anping County Hengyuan Hardware Netting Industry Product Co.,Ltd. |
|
Verified Suppliers
|
|
|
Rod Based Water Wire Screen is the largest manufacturer of premium water well screens, bringing the best, most cost efficient water wells to the industry. The continuous slot (vee-wire) design allows lower entrance velocity of the water, which reduces encrustation rates. The vee-wire slot design also resists plugging and prevents sand from damaging pumps.
Name: Rod Based Water wire screen,Water well screen, Johnson screen,Wire warp screen,Screen tube,Slotted tube,Wound screen,Continuous slot screen filter,Sand control screen, Wedge wire screen,Oil screen. | |||||||
Material: Stainless steel 304,316L,Non-magnetic Stainless steel, Low carbon galvanized,904L,Duplex steel etc. | |||||||
Diameter: From 29-1300mm (Normal diameter is in the below table) | |||||||
Slot: From 0.1-100mm (Normal slot 0.5mm, 0.63mm, 0.75mm, 1.0mm, 1.5mm, Pls refer to below table) | |||||||
Length: From 100-6000mm (Normal length is 2.9m and 5.8m, to fit container) | |||||||
Wrap wire:2*3.5mm,2.2*3.5mm,2.2*4.5mm,3*4.6mm,3*5mm,3*6mm,3*6.5mm,3.2*6mm,4*7mm etc. | |||||||
Support rod:ø3.0-ø6.0mm round wire, Also can be Vee-shaped wire. | |||||||
Ends:Welded rings/Plain beveled ends,Male/female threaded,Flange etc. | |||||||
Use:Water Well,Waste Water Treatment,Water supply systems,Coal & Mine,Food Processors & Beverage Screens,Environmental protection,Refining & Petrochemical,Architecture & Construction etc. | |||||||
Sizes (inch) | OD (mm) | Slot (mm) | Length (m) | Tenslie Strength | Collapse Strength | Wrap wire Vee-shaped wire(mm) | Support rod Round wire(mm) |
3-1/2 | 88.9 | 1.0 | 2.9 | ＞22 | 10.2 | 2.2*3.5 (Width*height) | ø3.8MM×22 |
4-1/2 | 114.3 | 1.0 | 2.9 | ＞28 | 11.5 | 2.2*3.5(Width*height) | ø3.8MM×22 |
6-5/8 | 168.3 | 0.75 | 5.8 | ＞40 | 12.8 | 2.2*3.5(Width*height) | ø3.8MM×32 |
6-5/8 | 168.3 | 1.0 | 5.8 | ＞33 | 12.8 | 2.2*3.5(Width*height) | ø3.8MM×32 |
6-5/8 | 168.3 | 0.63 | 5.8 | ＞83 | 45 | 3.2*6.0(Width*height) | ø6.0MM×32 |
8-5/8 | 219.1 | 1.0 | 5.8 | ＞34 | 21.9 | 2.3*3.5(Width*height) | ø3.8MM×48 |
8-5/8 | 219.1 | 1.0 | 5.8 | ＞50 | 38.2 | 3.0*5.0(Width*height) | ø4.0MM×48 |
8-5/8 | 219.1 | 1.0 | 5.8 | ＞60 | 46 | 3.2*6.0(Width*height) | ø5.0MM×48 |
10-3/4 | 273.1 | 0.75 | 5.8 | ＞50 | 32.9 | 2.2*3.5(Width*height) | ø4.0MM×55 |
10-3/4 | 273.1 | 1.0 | 5.8 | ＞60 | 39.5 | 3.0*4.6(Width*height) | ø4.8MM×55 |
10-3/4 | 273.1 | 1.0 | 5.8 | ＞100 | 48 | 3.2*6.0(Width*height) | ø5.0MM×55 |
12-3/4 | 323.9 | 1.0 | 5.8 | ＞120 | 37.2 | 3.0*5.0(Width*height) | ø4.0MM×56 |
14 | 355.6 | 1.0 | 2.9 | ＞80 | 37.8 | 3.0*5.0(Width*height) | ø4.0MM×59 |
16 | 426 | 1.0 | 2.9 | ＞80 | 37.5 | 3.0*5.0(Width*height) | ø4.0MM×54 |
1. It has high mechanical strength, can bear large pressure drop;
2. It has equal slots for filtering, can form equally distributed
filter cake, easy to clean for reusing;
3. The wedge type slot can improve backflushing and regeneration
performance ;
4. It has resistance for pressure, temperature, aging,corrosion,
can be applied for different kinds of fluid .
