11" x 17" 75 sheets each pack Laser Printer Water Slide Decal Paper
Summary
Create your own decals with this high quality, inexpensive
water-slide decal paper for laser printers. This paper can be used
with most laser printers, ALPS printers and color copiers. It is
recommended to test a couple of sheets with your printer or copier
to ensure compatibility prior to producing multiple copies.
Application
We have customer who use our water-slide decals for
all kinds of projects. Restoring antique watches, clocks, stoves,
and even boat motors. Creating custom art for motorcycle helmets,
bicycles, and car graphics. Modelers off all sorts use our
water-slide decal papers to create custom decals for their model
cars, boats, planes, trains, trolley cars, and even robots &
rockets. Don't settle for pre-made decals customize your project
using our decal media and your color laser printer.
Storing The Decal Paper (IMPORTANT)
The proper storage of decal paper is something that is often
ignored.
Most decal paper (especially the inkjet paper) will react with
changes in moisture and temperature. If loose sheets are left out
of the open, the top sheet may start curling up and the sheets
below will do the same one by one over the course of days or weeks.
I have found that many of the thinner glossy papers seem to be
especially prone to curling.
Store the media in a dry, cool place as humidity and moisture may
damage sheets. The best way to store unused decal paper is in a
plastic bag, then turn upside down under a moderate weight such as
a thick book. Printed decals should be used within days of printing
or stored as described above.
Instruction
- Cut out the graphic you want
- Immerse the paper in water in about 5-10 sec,the fixing paper
will absorb enough water and can be seperated from the water
transfer paper.
- Hold the paper(two layer together) and transfer it to the
surface of your substrate.shift the paper a little bit. use your
figer to hold the water transfer paper in position.pull and shift
the fixing paper away slowly.shift and fix the water transfer paper
onto the position you want.
- Use the paper towel or a piece of the cloth to squessze the
water.avoid excessive pressure that may shift or damage the water
transfer paper.
- When applying to large area,you may use a plastic squeegee to
squeeze the air bubble and water away.
- After approx for about 10mins, the printed graphic will
transfer onto the surface of the substrate.use a forceps to peer
off the transparen covering paper.
- When dried,place the subject in the oven and baked.the baking
temperatuer and curling time various with different
materials.please refer to the following chart for details.
- Finished.
Advangage
- No white dot
- No leakage of plastic
- Curled to stretch time: 5 ± 1s
- Separation time after soaking: 5 ± 1s
- Total dehydration time: 10 ± 2s
- Without resin left on the decal
- Not fade when soaked in water
Package and delivery
Normally we will use the stander export carton to
make sure the goods is not damaged, we can pack it 75 sheet
for one pack ,and we can change it as your requirement.
We will arrange the shipment as soon as possible if
we have store,and it may be need 7-10 days if we do not have
store.