CE Certificate Kraft Paper Black Coated Poultry Farm Cooling Pad with Stainless Steel frame

Wet Film material is the core for the humidifier. It is a plant fiber as the substrate, through the special composition of the resin processing sintering to form corrugated plate-like cross-overlapping polymer composite material, which contains slow release type of antibacterial agent, with a strong water absorption, a good self-cleaning ability, Non-toxic, resistant to mold, fire and provide the largest contact between water and air surface area.

CE Certificate Kraft Paper Black Coated Poultry Farm Cooling Pad with Stainless Steel frame

Working Principle

Clean tap water or chilled water through a water inlet pipe to the wet film humidifier lower circulation water tank, the water enters the water tank is composed of float valve and liquid level switch to control. The water in the water tank by a water pump to wet film on top of the water distributor, through wet membrane water distributor will be uniform water distribution, water under the action of gravity along the wet membrane surface flow down the wet film, wetting, penetrating, when the air through the wet wet film during its increased humidity, temperature drop, another part without evaporation water from the humidifier bottom back to the water tank; the water in the water tank through a circulating water pump using repeated cycles, the wet film humidification of air. So as to achieve the purpose of saving water. When the circulating water level in the water tank of water drop, switch to open, to ensure water tank, the water level of the water tank is maintained at a set height range; when the circulation of the water level in the tank falls to a certain height, the water tank of the low water level switch, ensure the circulating pump in the absence of water stop. In the process of temperature and membrane water evaporated part, but does not consume additional energy.

Clean tap water or chilled water through a water inlet pipe to the wet film humidifier lower circulation water

tank, the water enters the water tank is composed of float valve and liquid level switch to control. The

water in the water tank by a water pump to wet film on top of the water distributor, through wet membrane

water distributor will be uniform water distribution, water under the action of gravity along the wet

membrane surface flow down the wet film, wetting, penetrating, when the air through the wet wet film

during its increased humidity, temperature drop, another part without evaporation water from the

humidifier bottom back to the water tank; the water in the water tank through a circulating water pump

using repeated cycles, the wet film humidification of air. So as to achieve the purpose of saving water.

When the circulating water level in the water tank of water drop, switch to open, to ensure water tank, the

water level of the water tank is maintained at a set height range; when the circulation of the water level in

the tank falls to a certain height, the water tank of the low water level switch, ensure the circulating pump

in the absence of water stop. In the process of temperature and membrane water evaporated part, but

does not consume additional energy.

CE Certificate Kraft Paper Black Coated Poultry Farm Cooling Pad with Stainless Steel frame

Main Features:

• Humidification clean without whitening phenomenon; inner main tank with circulating water
•  
• detection and water storage memory; timing automatic water changing.
•  
• Humidification distance is short, just 300 to 400mm
•  
• Saturation efficiency up to 90%
•  
• Water saving and power costing, the water can be recyclable used. With perfect cost saving
•  
• effect. The whole system
•  
• Safety and reliability. Imported wet film, prevent mold, prevent the breeding of bacteria.
•  
• Service time 7 to 10 years.
•  
• Temperature cooling effect. Reduce the power consumption for the air conditioning.

FAQ:

Q1. How To Order ?

Step 1 : Send an inquiry
Step 2 : Confirm the operating conditions
Step 3 : product recommendation and quotation
Step 4 : sampling
Step 5 : confirm order details and make a payment
Step 6 : proceed with product preparation upon receipt of payment
Step 7 : shipping

Q2. How To Pay ?

We accept the following payment methods
1. T/T (Bank Transfer)
2. Western Union
3. Paypal

Q3. How Do We Deliver ?

1. We ship products through major carriers like FedEx, UPS, TNT, EMS.
2. Sea shipment service available. (MOQ 1CBM)

Q4. What's The Lead-time ?

Q5. How Long Does It Take To Receive Shipment ?

It depends on where the buyer is located and which service is chosen.

Guidelines delivery times:

1. Priority Express (FedEx, UPS, TNT) : 1 ~ 3 working days

2. Economy (FedEx, UPS, TNT, EMS) : 3 ~ 9 working days

Q6. How To Track The Shipment ?

On the day we dispatch the shipment we will send a shipment notice

which includes the tracking number.

Q7. What Are Our Product Warranty Policies?

We provide a 12 month guarantee.

During the guarantee period we will replace defective goods and/or spare parts at our own expense,

only if the responsibility is solid confirmed as ours after investigation and discussion agreed by both

sides.

Q8. Why Choose Ucloud high pressure water misting Nozzle ?

We've been devoting ourselves to nozzle manufacturing for more than 30 years,

and have been working with top-notch customers from countries including Japan and many in Europe and

North America.

We enjoy a good reputation among existing customers for outstanding stability

resulting from strict and consistent quality checks and production controls.

We trust we're fully capable of satisfying your high-end requirements and meeting your high standards.

Q9. How to contact with us ?

Email: 18669741981@gmail.com

Tel (What's App): 0086-18669741981

Skype: qingdaosjm0319