Active Member
|
[China]
Address: No. 951, Taishan Road, Tongling, Anhui, China
Contact name:Dale Gao
Anhui Prosper Flow Technology Co., Ltd |
|
|
PN10/PN16 DN50-DN800 Flange End Resilient Seated Sluice Gate Valve
1. PRODUCT PROFILE
A gate valve or a Sluice gate valve is described as a valve that uses a gate or wedge shape disk that slides perpendicular to the flow of the fluid into or out of the pipeline. When the gate valve is fully opened, the disk of the gate valve is completely separated from the flow. This practically gives no opposition to flow. Due to this, very little reduction in pressure is experienced as the fluid moves through the gate valve.The sluice gate valve is the common type of valve that is used in process plants to handle slurries. In operation, these valves are either fully opened or fully closed.Sluice gate valves cannot be used for throttling as accuracy cannot be achieved using them. The high flow velocity in the partially open valve can cause disk and seat surface erosion and can also cause vibration and noise.
| Material | Ductile iron | Medium | Clear and sewage water,air |
| Brand | OEM | Actuator | Manual |
| Working pressure | PN10 / PN16 | Connection | Flange End |
| Color | Blue,Red | Type | Rising stem |
2. FEATURES
· Full bore design
· The copper nut and soft sealing valve are of embedded connection, making them closely integrated. There is no looseness or damage due to vibration caused by water flow.
· The valve body adopts powder epoxy resin coating, to prevent corrosion and rust of the valve body, and it can be used for sewage system.
· Valve stem with three O ring seal, small friction resistance, light switch, no water leakage.
· Low operating torque
· Every valve be 100% tested and qualified before packing and delivery
3. STANDARD
· Design & manufacturing:DIN3202-F5
· Face to face: EN558-1 series 3,14,15
· Flanged ends: ISO7005-2, EN1092-2, DIN2501 PN10/PN16
· Inspection & testing: EN12266-1
4. TECHNICAL SPECIFICATION
· Working pressure: PN10 / PN16 Bar
· Size: 2"-32"(DN50~800mm)
· Materials: cast iron, ductile iron
· Epoxy resin thickness: ≥250micron
· Applicable temperature: 0℃~+80℃
· Available with handwheel/square cap/gearbox/ electric actuator
5. APPLICATION
· Water supply system
· Waste water, sludge, sewage treatment industry
· Irrigation system
· Real estate industry
· Mining, steel industry
· Metallurgy plant, power plant
· Textile, pharmaceutical industry
· Food, pharmaceutical industry
