Water Quality Testing Pen TDS Pen with Titanium Alloy Probe Water Tester

Water Quality Testing Pen TDS Pen with Titanium Alloy Probe Water Tester

1. Description: Water Quality Testing Pen TDS Pen with Titanium Alloy Probe Water Tester

2. Specifications:

3. Health Tips

      0-50: mineral water

      50-100: barely acceptable tap water   

      200-400: Poor state     

      400-500: U.S.EPA the maximum level of pollutants.

4. Healthy drinking water temperature: 35-38 ℃: the temperature closest to the human body temperature. For hot drinks, the optimal temperature of red honey water 50 ℃; hot milk, hot soup, etc. at 60 ℃, the best taste. In any case, drinking water and eating food temperature, are never more than 60 ℃. For cold drinks, soft drinks at 5 ℃ most delicious. 

5.Product Description

   Water testing pen TDS used to test the water, also known as the total dissolved solids, measured in units of mg / L (mg / L), it shows that 1 liter of water dissolved in the number of milligrams of soluble solids. The higher the TDS value, the more impurities are present in the water. To determine the purity of water, both the test water temperature and ambient temperature function, can be applied to the family, home tourism, the wild as a drinking water quality inspection tool.

6.Instructions:

1), press the ON / OFF, turn on the power, LCD display the default ppm water quality of total dissolved solids value.

2). Press the MODE key to select the test function. Select ppm, Celsius, Fahrenheit, F

3). After the test item is selected, the test will be performed automatically and the reading will be automatically locked after the data display. Clear after the insertion of water can display the reading, according to different water quality shows the corresponding TDS value, if the manual lock can press the CLEAR key. To retest, press the CLEAR key and enter the retest.

4), do not start the new operation after the action test pen will automatically shut down after 60s.

5), continue to press ON / OFF / HOLD key 3s, can be manually active shutdown.

6), the use of finished, clean test head, properly stored.

7.Product Selling Points

1), can remind the health of the water quality and health of the appropriate drinking water temperature

2), can prevent and detect water safety, water purity at any time to determine

3), the test water temperature and ambient temperature

4), full penetration LCD large screen display, easy to read

5), High-precision process, detection precision, waterproof design, low-power chip

6), simple, one-click to use

8. Show