18.9 / 20L Barrel 1 2 3 4 5 Gallon Bottle Filling Machine 600BPH

18.9/20L Barrel 1.2.3.4.5.6 Whole Line Design Of 600BPH Assembly Line Of Gallon Bottle Filling Machine

600BPH 18.9/20L 5-gallon irrigation production line/barrel irrigation machine

600BPH 5 gallon 20L bottle filling machine/18.9L bottle filling production line/barrel filling machine

Product introduction:
This 5-gallon bottle filling machine is specially designed for filling pure water, distilled water, mineral water and other bacteria free liquids.

1, 2, 3, 4.5.6 GAL bottles can be applied, and customized debugging can be conducted for incoming samples
The equipment integrates bottle washing, filling, capping, capping and finished products automatically

Filling speed: 60BPH-1200BPH

Bottle material: plastic

Intimate and safe
1. High safety operation: automatic disconnection protection for electric leakage and short circuit;
2. Under pressure protection: when the air inlet pressure is 0.5MPa, the filling equipment will stop automatically;
3. Water shortage protection: when the water tank level is lower than the liquid switch level, the product will automatically stop working

Advantages:

1.) This machine integrates the washing machine, filling machine and capping machine.

2.) The machine is made of stainless steel, which is corrosion resistant and easy to clean.

3.) The main electrical components and air circuit components are international brands.

4.) The water pump is Hangzhou Nanfang (Grundfos available)

5.) The nozzle adopts the technology of American Spraying System Company.

Details:

Cap decapper
This automatic decapper is a special equipment for 5 gallon recycling bucket. It will not damage the cover.
This machine is controlled by computer and its capacity is adjustable. Airtac cap pulling mechanism adopts pneumatic adjustment, which solves the problems of barrel height tolerance and barrel mouth tolerance, and greatly improves the success rate of cap pulling. 304 stainless steel frame and body.

External brush

Function: Clean the outside of the 5-gallon bottle with a brush and water

1. Rotary cleaning of the bottle body.
2. Frame and body material: all 304 stainless steel.
3. All 304 stainless steel pipes, valves and joints shall be polished and free of dead corners
4. Linear washing method, with one 350 brush, one 200 brush, three 300 * 3 brushes, 20 brushes
5. Water pump: 304 stainless steel pump
6. Cleaning tank: size 500 * 300 * 600 * 1.2304 stainless steel
7. No bottle, no washing

Cleaning, filling and sealing cover three in one

1.3 Arrange 12 washing stops. Everything stopped for about 23 seconds
2.304 stainless steel plug-in filling nozzle, two times of high-precision filling, and the filling volume is adjustable.
3. Water pump: 304 stainless steel pump. Three washing pumps and one filling pump.
4. Mitsubishi PLC control system, fully automatic operation, Schneider and Omron brand other electrical components
5. Equipped with AIRTAC brand cylinder, F.R.L. combination and cylinder solenoid valve.
6. Frame and body: all 304 stainless steel, combined with transparent glass fiber window

Function: conveying empty bottles and full bottles
1. The total length is subject to the layout
2. Motor drive
3. SUS304 stainless steel frame and chain plate

Zhangjiagang City Bievo Machinery Co., Ltd. is located in a national level development zone - Zhangjiagang Economic And Technology Development Zone, covering area more than 8,000 square meters.We enjoy convenient transportation with Shanghai Hongqiao International Airport and Shanghai Pudong International Airport on hand.Which accumulated a great number of China's top technologists in the liquid beverage industry.We have complete system from designing, manufacturing, installation, training to after service.Our main product water production line, carbonated beverage production line . Fruit juice and milk production line ,3 to 5 gallons production line, daily chemical production line and so on.Plat and tube UHT device, CIP system.All the products are sold well.We devote ourselves to the development, research and production of liquid food and beverage filling and packing industry .

Q1: Where is your factory? How can I visit there?