Beijing Tengine Innovation Instruments Co.,Ltd |
Verified Suppliers
|
|
Dual Channel Transmitter Water Turbidity Analyzer / Meter Sewage
Testing Equipment TSS10AC
1. Application
• TSS turbidity analyzer is designed for monitoring the turbidity or suspended solids.
• Sewage treatment plant or wastewater treatment plant: inflow and effluent
• Water supply plant: raw water, backwash water, sedimentation effluent turbidity monitoring
• Other industries: industrial recycling and cooling water quality monitoring
2. Features and Benefits
• Available in measuring both turbidity and suspended solid(or sludge) concentration
• Advanced double Infrared beam, 180 ° transmission and 90 ° scattered light, detection technology.
• Digital sensor with good anti-interference performance and high stability, and the maximum extension of cable length is hundreds meters.
• “plug and play” sensor, and dual-channel transmitter.
• Modbus RS485/RS232 or Profibus DP network connection for data transmission is Optional, English menu.
• 3 Relays with programmable hysteresis provide high-limit alarm, low-limit alarm or timer.
• Built-in data logger with the capacity to store data for up to 10 years.
3. Specifications
Performance characteristics | |
Measuring Range | 0~4000NTU,0~1000mg/L |
Resolution | 0.01NTU, 1mg/L |
Accuracy | ±1%FS |
Repeatability | 1% |
Calibration | Factory calibrated, also can be calibrated by customer on site |
Display | LCD displays data including date, time,measurement value, trendline, etc., available in both Chinese and English menu |
Data storage | Automatic Data Storage for up to 10 years, power-off data protection |
Outputs | |
Analog Outputs | 0/4-20 mA output( maximum load 800 ohms), optional selection of 3.8mA or 21mA(under the condition of malfunction) |
Relay outputs | 3 Relays with programmable hysteresis, alarm or timer function optional |
Relay capacity | 2A, 250VAC |
Digital Communication | MODBUS RS232/RS485,Profibus DP is optional |
Power supply | |
AC power supply | 85~265 VAC, 50Hz/60Hz |
DC power supply | 24 VDC ±10% |
Physical parameters | |
Dimension of Transmitter | 270×205×100mm(W×H×D) (10.6*8*3.9 in.) |
Dimension of Sensor | Φ60×146mm (2.4*5.7 in.) |
Materials | --Transmitter: PC --Sensor: 316L stainless steel |
Process connection of sensor | 1 inch cone male thread |
Environmental conditions | |
Ingress protection | --IP66 (transmitter) --IP68 (Sensor) |
Operating Temperature | --Transmitter: -20~60℃ --Sensor: 0~50℃ |
Operating Pressure | ≤6Bar |
4. Ordering Information
Ordering Information | ||||||
Transmitter Selection | ||||||
| Channel number | Signal output | Power version | |||
TSS |
|
|
| |||
| code | meaning | code | meaning | code | meaning |
| 1 | Single channel | 0 | 4~20mA | AC | 220VAC |
| 2 | Dual channel | 1 | RS 485(Modbus) | DC | 24VDC |
|
|
| 2 | RS 232(Modbus) |
|
|
|
|
| 3 | Profibus DP |
|
|
Example TSS10AC, single channel suspended solids concentration transmitter, output 4~20mA, 220V AC Power Supply | ||||||
Sensor Selection | ||||||
| Measuting range | Cable length | ||||
TSS-S |
|
| ||||
| code | meaning | code | Meaning | ||
| 0 | 0~4000NTU,0~1000mg/L | C10 | 10m cable | ||
|
|
| CXX | XXm cable | ||
Example TSS-S0C10, a turbidity sensor, 0~4000NTU/0~1000mg/L , with 10m cable. |
(3) Accessories
FA0000: Immersion mounting bracket, stainless steel
FA0001: Immersion mounting bracket, PVC
FA0020: Stainless steel floating ball mounting bracket
FA0021: PVC floating-board mounting bracket
FA0031: Circulation mounting accessory, PVC
FA0900: Stainless steel adapter
FA0901: PVC adapter
FA0800: Instrument protective housing, stainless steel
FA0810: Instrument protective housing, stainless steel, with heater unit
FC0100: Altrasonic self-cleaning device